This is only a preview of the December 2026 issue of Silicon Chip. You can view 37 of the 104 pages in the full issue, including the advertisments. For full access, purchase the issue for $10.00 or subscribe for access to the latest issues. Articles in this series:
Items relevant to "Advanced Cable Analyser":
Items relevant to "Inrush Current Limiter":
Articles in this series:
Items relevant to "NeoPixel RGB LED Analog Clock, Part 2":
Items relevant to "The Magic Candle":
Purchase a printed copy of this issue for $15.00. |
Advertising Index
Altronics.................................41-44
Blackmagic Design................. 7, 11
DigiKey Electronics..................OBC
Emona Instruments.................. IBC
Hare & Forbes............................. 13
Jaycar............................. IFC, 26-29
Keith Rippon Kit Assembly....... 103
LD Electronics........................... 103
LEDsales................................... 103
Microchip Technology.................. 5
Mouser Electronics....................... 3
PCBWay......................................... 9
PE Back Issues............................. 4
PMD Way................................... 103
SC Versatile Battery Checker..... 12
Silicon Chip Binders.................. 87
Silicon Chip Christmas PCBs... 75
Silicon Chip DCC Kits................ 99
Silicon Chip Shop.................76-77
Silicon Chip Subscriptions...... 100
The Loudspeaker Kit.com.......... 93
Tronixlabs.................................. 103
Wagner Electronics....................... 8
Errata and on-sale date
PicoSDR, April 2026: the optional
external TFT LCD screen should
be the 2.8-inch type with the
ILI9341 controller (Silicon Chip
Cat SC3410), not the 3.5-inch type
with an ILI9488 controller, as was
specified in the parts list originally.
Next Issue: the January 2027 issue
is due on sale in newsagents by
Tuesday, December 29th. Expect
postal delivery of subscription
copies in Australia between
December 28th and January 13th.
104
Silicon Chip
It can also be hard to find a distributor for these parts. None of our usual
parts sources, including element14,
RS, DigiKey and Mouser, seem to stock
these CDIL BF469s. We can find some
on eBay, but that is not a recommended
place to source critical transistors for
audio amplifiers! It’s rife with counterfeits.
Without having some to test, we
couldn’t say if they are any good. It’s
possible they are fine, but we can’t
recommend them just because they’re
supposedly equivalent.
We’re also concerned if there is
only a single manufacturer making a
specific part. They could discontinue
production tomorrow, like many of the
previous BF469 manufacturers did.
Thus, we think the SOT-223 transistors Phil Prosser specified in the Calliope article, like the BF722, are the best
alternatives available. They’re inexpensive, tested and known to work
well. Their supply seems to be good,
and they are easy to buy.
One thing we should note is that
while looking for a supplier for the
CDIL BF469s, we discovered that element14 sells “Multicomp Pro” (their
house brand) BF469s (Cat 4343315).
Oddly, they list the Vceo rating as 50V,
when a proper BF469 has a 250V rating. Another case of a part claiming
to be something it isn’t? On the other
hand, they claim an ft rating of 1.5GHz
– impressive if true!
Sourcing parts for an
Ultra-LD Mk.4 Amp
I’m looking at putting together a
few of the Ultra-LD Mk4 Amplifiers (July-October 2015; siliconchip.
au/Series/289). The HN3A51F and
HN3C51F dual transistors used are
no longer available. Is there an equivalent?
Also, the NJL3281 and NJL1302DG
Thermaltrak transistors, although not
(yet) obsolete, seem to be somewhat
out of stock in many places. Jaycar
has them in stock at some stores, but
they’re listed as “Clearance” on their
website.
On an unrelated subject, I’ve ordered
two ADAU1467 Core boards through
AliExpress to build the Digital Preamplifier and Crossover (October-December
2025; siliconchip.au/Series/449). In
both cases, I got ADAU1466 core
boards. Talking to both AliExpress
and to the shop has been an exercise
Australia's electronics magazine
in frustration. (K. J., Cleveland, Qld)
● The IMX8-7-F is a reasonable
substitute for the HN3C51F dual NPN
transistor used in the Ultra-LD Mk.4
amplifier, but unfortunately, there
are no good alternatives to the PNP
input pair (HN3A51F) with the same
performance specifications and footprint. Happily, though, we still have
some and can supply a small set of
parts that includes both (siliconchip.
au/Shop/7/3400).
While the Thermaltrak transistors
are becoming harder to buy, they work
extremely well, and we don’t think
it’s worth designing a new amplifier
for a different transistor series until
they are simply unavailable. If Jaycar
runs out of stock, we suggest ordering
from DigiKey, which still has reasonable stock levels for now:
www.digikey.com.au/en/products/
detail/onsemi/1484399
www.digikey.com.au/en/products/
detail/onsemi/1484396
Regarding the ADAU1467 core
boards, Phil Prosser responds: that’s
unfortunate, they aren’t cheap! There
are some significant differences in
I/O between the ADAU1466 and
ADAU1467. Without doing a lot of
work, I can not say if you can make
it work. You would definitely need to
reprogram the ADAU chip using Sigma
Studio, and I am worried that they
won’t have sufficient I/O for the job.
When ordering from AliExpress,
you need to be really careful as sellers
often combine multiple different items
into the same listings, and you have
to choose the right “colour” (which
actually selects the model). Sometimes there’s a single item for sale, and
we can provide a link, then the seller
changes the listing to include multiple
items, which is a real trap.
Using ETI327 Hazard
Flasher project at 6V
Do I need to modify ETI project 327,
“Turn and hazard indicator for your
vehicle”, for use on a vehicle with a 6V
electrical system? (K. W., Manly, Qld)
● The 555 ICs used for timing
should operate at 6V without needing
any changes to that part of the circuit.
We suggest changing the base resistors
for Q2 and Q3 from 2.2kW to 1kW to
maintain a similar base current at 6V
compared to the original design at 12V.
Otherwise, we expect it will operate
SC
correctly with a 6V supply.
siliconchip.com.au
|