Silicon ChipOuter Back Cover - October 2026 SILICON CHIP
  1. Outer Front Cover
  2. Contents
  3. Publisher's Letter: A self-made trap for RAM manufacturers
  4. Feature: Improvised Electronics, Part 2 by Dr David Maddison, VK3DSM
  5. Project: Mighty USB-C Bench Supply, Part 1 by Tim Blythman
  6. PartShop
  7. Project: Programmable USB-PD Modules by Tim Blythman
  8. Feature: Motor Control, Part 1 by Andrew Levido
  9. Project: Audio Spot Frequency Oscillator by Richard Kabzinski
  10. Feature: A guide to EV Charging by Geoff Graham
  11. Subscriptions
  12. Project: Phenomenal Pinball Machine, Part 5 by Phli Prosser
  13. Serviceman's Log: ELSEC 764 UV Monitor Repair by David Worboys et al
  14. PartShop
  15. Vintage Radio: The Philco Model 38-7 by Dr Hugo Holden
  16. Market Centre
  17. Advertising Index
  18. Notes & Errata: Simple USB Power Monitor, June 2026; Simple LC Meter, May 2026
  19. Outer Back Cover

This is only a preview of the October 2026 issue of Silicon Chip.

You can view 36 of the 104 pages in the full issue, including the advertisments.

For full access, purchase the issue for $10.00 or subscribe for access to the latest issues.

Articles in this series:
  • Improvised Electronics, Part 1 (September 2026)
  • Improvised Electronics, Part 2 (October 2026)
Items relevant to "Mighty USB-C Bench Supply, Part 1":
  • USB-C Power Supply main PCB [04107261] (AUD $5.00)
  • USB-C Power Supply control panel PCB [04107264] (AUD $5.00)
  • PIC16F18146-I/SO programmed for the USB-C Power Supply [0410726A.HEX] (Programmed Microcontroller, AUD $10.00)
  • PIC16F18115-I/SN programmed for the USB-C Power Supply [0410726B.HEX] (Programmed Microcontroller, AUD $10.00)
  • 0.91-inch white OLED with 4-pin I²C interface (Component, AUD $7.50)
  • TH transistor - 2SC5242-O(Q)‎ 230V 15A NPN (TO-3PN) (Component, AUD $8.00)
  • USB-C Power Supply kit (Component, AUD $95.00)
  • USB-C Power Supply firmware (Software, Free)
  • USB-C Power Supply PCB patterns (PDF download) [04107261-2] (Free)
Articles in this series:
  • Mighty USB-C Bench Supply, Part 1 (October 2026)
  • Programmable USB-PD Modules (October 2026)
Items relevant to "Programmable USB-PD Modules":
  • USB-C Power Supply main PCB [04107261] (AUD $5.00)
  • USB-C Power Supply control panel PCB [04107264] (AUD $5.00)
  • PIC16F18146-I/SO programmed for the USB-C Power Supply [0410726A.HEX] (Programmed Microcontroller, AUD $10.00)
  • PIC16F18115-I/SN programmed for the USB-C Power Supply [0410726B.HEX] (Programmed Microcontroller, AUD $10.00)
  • 0.91-inch white OLED with 4-pin I²C interface (Component, AUD $7.50)
  • TH transistor - 2SC5242-O(Q)‎ 230V 15A NPN (TO-3PN) (Component, AUD $8.00)
  • USB-C Power Supply kit (Component, AUD $95.00)
  • USB-C Power Supply firmware (Software, Free)
  • USB-C Power Supply PCB patterns (PDF download) [04107261-2] (Free)
  • Preassembled USB-C PPS control module (Component, AUD $25.00)
  • USB-C PPS control module PCB pattern (PDF download) [04107265] (Free)
Articles in this series:
  • Mighty USB-C Bench Supply, Part 1 (October 2026)
  • Programmable USB-PD Modules (October 2026)
Items relevant to "Audio Spot Frequency Oscillator":
  • Audio Spot Frequency Test Generator PCB [04111261] (AUD $5.00)
  • PCM5102 DAC module (Component, AUD $10.00)
  • NJM5532DD ultra-low-noise, low-distortion dual op amp (Component, AUD $5.00)
  • NJM5532D low-noise, low-distortion dual op amp (Component, AUD $3.50)
  • 0.96in white OLED with SSD1306 controller (Component, AUD $10.00)
  • 0.96in cyan OLED with SSD1306 controller (Component, AUD $10.00)
  • Audio Spot Frequency Oscillator firmware (Software, Free)
  • Audio Spot Frequency Test Generator PCB pattern (PDF download) [04111261] (Free)
Items relevant to "Phenomenal Pinball Machine, Part 5":
  • Pinball Machine Control PCB [08107261] (AUD $25.00)
  • Pinball Machine Power Supply PCB [08107262] (AUD $7.50)
  • Pinball Machine Player LED PCB [08107263] (AUD $2.50)
  • Pinball Machine Score LED PCB [08107264] (AUD $5.00)
  • Pinball Machine LED Output PCB [08107265] (AUD $2.50)
  • Pinball Machine Bumper LED PCB [08107266] (AUD $5.00)
  • Pinball Machine Cascade LED PCB [08107267] (AUD $5.00)
  • Pinball Machine Switch Input PCB [08107268] (AUD $2.50)
  • Pinball Machine General Input PCB [08107269] (AUD $2.50)
  • Pinball Machine High Current Interface PCB [08107260] (AUD $2.50)
  • Pinball Machine Rollover Interface PCB [08117261] (AUD $2.50)
  • Pinball Machine Bumper Driver PCB [08117262] (AUD $5.00)
  • 5m of 10-way ribbon cable (Component, AUD $10.00)
  • Pinball Machine Control Board short-form kit (Component, AUD $150.00)
  • Pinball Machine Power Supply short-form kit (Component, AUD $50.00)
  • Pinball Machine cable and connector set (Component, AUD $65.00)
  • Software and 3D printing files for Phil Prosser's Pinball Machine (Free)
  • Phil's Phenomenal Pinball Machine PCB patterns (PDF download) [08107260-9, 08117261-2] (Free)
Articles in this series:
  • Phenomenal Pinball Machine, Part 1 (June 2026)
  • Phenomenal Pinball Machine, Part 2 (July 2026)
  • Phenomenal Pinball Machine, Part 3 (August 2026)
  • Phenomenal Pinball Machine Part 4 (September 2026)
  • Phenomenal Pinball Machine, Part 5 (October 2026)

Purchase a printed copy of this issue for $14.00.