THIS IS THE KIT FOR THE PROJECT PUBLISHED IN THE NOVEMBER 2016 ISSUE - NOT THE MICROMITE LCD BACKPACK PUBLISHED IN THE FEBRUARY 2016 ISSUE (SEE SEPARATE SHOP ITEM).
A kit of all the parts required to build the Micromite Plus LCD BackPack. This includes:
PCB
2.8-inch touchscreen with 320x240 pixels
Programmed SMD microcontroller and 20MHz crystal
3.3V low-dropout regulator and supply supervisor IC
USB & microSD card sockets
All capacitors and resistors (SMD)
Pin headers (male and female)
Male headers include a 21-pin, 18-pin, 2 4-pin, 3-pin & 2-pin
Tapped spacers and machine screws
Reset switch and power indicator LED
UB3 lid (laser-cut 3mm acrylic)
The PCBs, programmed microcontroller and lid also available separately.
For assembly instructions, see the article in the November 2016 issue.
The 6-8mm screws & Nylon washers are to attach the BackPack to the supplied lid. If not using the lid, place the washers under the screw heads.
yes (9 available). Estimated dispatch time: up to 3 days