 |
Matte/Gloss Black UB3 Lid for 2.8-inch Micromite LCD BackPack
A lid laser cut from 3mm black acrylic which replaces the lid supplied with a UB3 "Jiffy" box. Attaches with the supplied screws. One side is gloss black, the other side is matte black. You can fit it either way around.
The 2.8-inch Micromite LCD BackPack is mounted on the rear of the lid using four M3 machine screws, with the touch-screen flush with the top surface. The cut-out is sized to leave minimal clearance around the screen. The cut-out and mounting holes are positioned so that the viewable area of the TFT display is centred. This lid can also be used with the Micromite Plus LCD BackPack.
130.5 x 68.2mm.
Note: for the lid to fit, the LCD pin header solder joints (top side) must be trimmed. Use two M3 washers (or one 1mm thick Nylon washer) as spacers between the TFT PCB and the lid.
Cat No SC3456. Price: AUD $5.00 1 |
 |
Add to trolley |
In stock: yes (215 available). Estimated dispatch time: up to 3 days | Related to:
|
Other items relevant for these projects:
Dead simple radio IF alignment with DDS:Micromite BackPack V2 with touch-screen and USB:Micromite BackPack Touchscreen DDS Signal Generator:Micromite Plus LCD BackPack:Touchscreen Super Clock:Touch-Screen Boat Computer With GPS:Ultrasonic Garage Parking Assistant:Micromite LCD BackPack With Touch-Screen Display:
|
|