Panels & Case Pieces -
Silicon Chip
Shop
Issues
Articles
Shop
Videos
Subscribe
Account
Indexes
Help, Contact & FAQ
Silicon Chip
Shop - Panels & Case Pieces
(search for shop items within this category)
Clear UB3 Lid for 2.8-inch Micromite LCD BackPack
A lid laser cut from 3mm clear acrylic which replaces the lid supplied with a UB3 "Jiffy" box. Attaches with the supplied screws.
The 2.8-inch Micromite LCD BackPack is mounted on the rear of the lid using four M3 machine screws, with the touch-screen flush with the top surface. The cut-out is sized to leave minimal clearance around the screen. The cut-out and mounting holes are positioned so that the viewable area of the TFT display is centred. This lid can also be used with the Micromite Plus LCD BackPack.
130.5 x 68.2mm.
Note: for the lid to fit, the LCD pin header solder joints (top side) must be trimmed. Use two M3 washers (or one 1mm thick Nylon washer) as spacers between the TFT PCB and the lid.
Cat No SC3337. Price: AUD $5.00
1
Add to trolley
(available until stock is exhausted)
In stock:
yes (64 available). Estimated dispatch time: 1-3 days
Related to:
Project: Micromite LCD BackPack With Touch-Screen Display
(February 2016
[print issue]
[online issue]
)
Project: Ultrasonic Garage Parking Assistant
(March 2016
[print issue]
[online issue]
)
Project: Touch-Screen Boat Computer With GPS
(April 2016
[print issue]
[online issue]
)
Project: Touchscreen Super Clock
(July 2016
[print issue]
[online issue]
)
Project: Micromite Plus LCD BackPack
(November 2016
[print issue]
[online issue]
)
Project: Micromite BackPack Touchscreen DDS Signal Generator
(April 2017
[print issue]
[online issue]
)
Project: Micromite BackPack V2 with touch-screen and USB
(May 2017
[print issue]
[online issue]
)
Project: Dead simple radio IF alignment with DDS
(September 2017
[print issue]
[online issue]
)
Other items relevant to these projects:
Dead simple radio IF alignment with DDS:
Micromite LCD BackPack PCB [2.8-inch version) [07102122]
($5.00)
Add 1 to trolley
PIC32MX170F256B-50I/SP programmed for the Micromite-based radio IF alignment with DDS [DDSIFAlign.HEX]
($15.00)
Add to trolley
MCP1700 3.3V LDO (TO-92)
($2.00)
Add 1 to trolley
AD9833 DDS module with programmable attenuator
($25.00)
Add to trolley
CP2102-based USB/TTL serial converter with 5-pin header and 30cm jumper cable
($5.00)
Add to trolley
Micromite LCD BackPack V2 complete kit
($70.00)
Add to trolley
(with default options)
Matte/Gloss Black UB3 Lid for 2.8-inch Micromite LCD BackPack
($5.00)
Add to trolley
Gloss Black UB3 Lid for 2.8-inch Micromite LCD BackPack
($4.00)
Add to trolley
Firmware (HEX) file and BASIC source code for the Micromite-based Radio IF Alignment [DDSIFAlign.HEX]
(Free)
Add to trolley
Micromite LCD BackPack PCB patterns (PDF download) [07102121/2]
(Free)
Add to trolley
Micromite LCD BackPack/Ultrasonic sensor lid cutting diagrams (download)
(Free)
Add to trolley
Micromite BackPack V2 with touch-screen and USB:
Micromite LCD BackPack V2 PCB [07104171]
($7.50)
Add to trolley
PIC16F1455-I/P programmed for the Microbridge [2410417A.HEX]
($10.00)
Add to trolley
PIC32MX170F256B-50I/SP programmed for the Micromite Mk2 plus capacitor
($15.00)
Add 1 to trolley
2.8-inch TFT Touchscreen LCD module with SD card socket
($25.00)
Add to trolley
Software for the Microbridge
(Free)
Add to trolley
Firmware (HEX) file and documents for the Micromite Mk.2 and Micromite Plus
(Free)
Add to trolley
Micromite LCD BackPack V2 PCB pattern (PDF download) [07104171]
(Free)
Add to trolley
Micromite BackPack Touchscreen DDS Signal Generator:
PIC32MX170F256B-50I/SP programmed for the Micromite-based DDS Signal Generator [SigGeneratorFull.HEX]
($15.00)
Add to trolley
Software for the Micromite-based Touchscreen DDS Signal Generator [SigGeneratorFull.HEX]
(Free)
Add to trolley
Micromite Plus LCD BackPack:
Micromite Plus LCD BackPack PCB [07110161]
($7.50)
Add to trolley
PIC32MX470F512H-120/PT programmed for the Micromite Plus
($20.00)
Add to trolley
Micromite Plus LCD BackPack complete kit
($65.00)
Add to trolley
(with default options)
Micromite Plus LCD BackPack PCB pattern (PDF download) [07110161]
(Free)
Add to trolley
Touchscreen Super Clock:
PIC32MX170F256B-50I/SP programmed for the Micromite-based Touchscreen Super Clock [SuperClockFull.hex]
($15.00)
Add to trolley
VK2828U7G5LF TTL GPS/GLONASS/GALILEO module with antenna and cable
($25.00)
Add to trolley
DS3231-based Real Time Clock & Calendar module with mounting hardware
($6.00)
Add to trolley
Firmware (HEX) file and BASIC source code for the Micromite-based Touchscreen Super Clock [v1]
(Free)
Add to trolley
Touch-Screen Boat Computer With GPS:
PIC32MX170F256B-50I/SP programmed for the Micromite-based Touch-screen Boat Computer [BoatComputerFullV7.hex]
($15.00)
Add to trolley
Modified software for the Micromite Boat Computer
(Free)
Add to trolley
Firmware (HEX) file and BASIC source code for the Micromite-based Touch-screen Boat Computer with GPS [V7]
(Free)
Add to trolley
Ultrasonic Garage Parking Assistant:
PIC32MX170F256B-50I/SP programmed for the Micromite-based Ultrasonic Garage Parking Assistant [ParkingAssistFull.hex]
($15.00)
Add to trolley
Micromite Parking Assistant sensor & lid
($7.50)
Add to trolley
(with default options)
Firmware (HEX) file and BASIC source code for the Micromite-based Ultrasonic Garage Parking Assistant
(Free)
Add to trolley
Micromite LCD BackPack With Touch-Screen Display:
Micromite LCD BackPack PCB [2.4-inch version) [07102121]
($1.50)
Add 1 to trolley
Micromite LCD BackPack V1 complete kit
($65.00)
Add to trolley
(with default options)
Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.