 |
Mini 12V USB Power Supply with Low-Battery Cut-out PCB [18107151/18107152]
PCB for the Mini 12V USB Power Supply with Low Battery Cutout. Can also be used to generate other voltages (step-down).
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
16 x 51mm.
This board is coded 18107152 but can also be used instead of the one coded 18107151, as it has exactly the same function.
Just don't fit any parts to the back side of the board if you don't need the low-battery cut-out function. Make sure that those pads can't short against anything during testing.
|
 |
Mini 12V USB Power Supply PCB pattern (PDF download) [18107151]
PDF with the PCB design for the Mini 12V USB Power Supply (double-sided).
It's a single-sided design with an optional bottom ground plane layer. Both layers are in a single PDF.
|
 |
SMD parts for the Mini 12V USB Regulator
All the SMD parts required to build the switchmode regulator board from the article, "Install USB Charging Points In Your Car".
See the parts list link below for details on what is included.
The PCB is available separately. Note that the (through-hole) connectors are not included as which ones you need depends on the application.
|
