Short Form Kits / Part Sets - Silicon Chip Shop

SMD parts for the Mini 12V USB Regulator

All the SMD parts required to build the switchmode regulator board from the article, "Install USB Charging Points In Your Car".

Pack includes:

1 x RT8299A 3A step-down regulator IC (SOIC-8)
1 x NR6045T100M 10µH 2.5A (3A sat.) 6x6mm SMD inductor
1 x SK33A 3A Schottky diode (DO-214AC/SMA)
1 x SMAJ15A 15V transient voltage suppressor (DO-214AC/SMA)
2 x 22µF 16V X5R SMD capacitors (3216/1206)
2 x 10µF 25V X5R SMD capacitors (2012/0805)
2 x 100nF 50V X7R SMD capacitors (3216/1206)
1 x 100pF 50V C0G SMD capacitor (3216/1206)
1 x 100kΩ ±1% SMD resistor (3216/1206)
1 x 6.8kΩ ±1% SMD resistor (3216/1206)
1 x 1.3kΩ ±1% SMD resistor (3216/1206)
1 x 100Ω ±1% SMD resistor (3216/1206)

PCB is available separately. Note that the (through-hole) connectors are not included as which ones you need depends on the application.

Cat No SC3040. Price: AUD $10.00 ¹		Add to trolley
In stock: yes (1 available). Estimated dispatch time: up to 3 days
Related to: Project: Install USB Charging Points In Your Car (July 2015)
Other items relevant for this project: Mini 12V USB Power Supply with Low-Battery Cut-out PCB [18107151/18107152] ($2.50) Mini 12V USB Power Supply PCB pattern (PDF download) [18107151] ($3.00)

Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.

Silicon Chip Shop - Short Form Kits / Part Sets (search for shop items within this category)