|
Reciprocal Frequency Counter firmware
The BASCOM source code and .hex file firmware for the Arduino Nano module used in the Reciprocal Frequency Counter.
|
|
0.96in cyan OLED with SSD1306 controller
A 4-pin (I²C) OLED screen in cyan. The display active area is approximately 22 x 11mm while the whole module is about 27 x 19mm.
|
|
Reciprocal Frequency Counter main PCB (CSE230101C)
The main PCB for the Reciprocal Frequency Counter.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
76 x 63.5mm.
|
|
Reciprocal Frequency Counter main PCB pattern (PDF download) [CSE230101C]
A PDF with the PCB pattern for the Reciprocal Frequency Counter.
It is a double-sided design. Both layers are in a single PDF file.
|
|
Reciprocal Frequency Counter front panel artwork (PDF download)
A PDF with the front panel artwork for the Reciprocal Frequency Counter.
|
|
Reciprocal Frequency Counter front panel PCB (CSE230102)
The front panel for the Reciprocal Frequency Counter, which is made from 1mm-thick PCB material with a black solder mask layer and white silkscreen printing.
76.5 × 63.5mm.
|
|
Short-form kit for the Reciprocal Frequency Counter
A small kit for the Reciprocal Frequency Counter that includes everything except the case and TCXO.
See the link immediately below for a full list of parts included in the kit.
Note: photo shows assembled prototype PCB including some parts that are not included in the kit (primarily the oscillator module).
|