Help, Contact & FAQ
Shop - Components
(search for shop items within this category)
0.96in cyan OLED with SSD1306 controller
A 4-pin (I²C) OLED screen in cyan. The display active area is approximately 22 x 11mm while the whole module is about 27 x 19mm.
Cat No SC6176. Price: AUD $10.00
Add to trolley
yes (21 available). Estimated dispatch time: 1-3 days
Project: AM-FM DDS Signal Generator
Project: 0-110dB RF Attenuator
Other items relevant for these projects:
0-110dB RF Attenuator:
0-110dB RF Attenuator PCB [CSE211003]
ATmega328P programmed with the firmware for the 110dB RF Attenuator [CSE211003.HEX]
Pulse-type rotary encoder with pushbutton and 18t spline shaft
Short-form kit for the 0-110dB RF Attenuator
Firmware and BASIC source code for the 0-110dB RF Attenuator [Attenuator 3]
0-110dB RF Attenuator PCB pattern (PDF download) [CSE211003A]
Front panel label and drilling diagram for the 110dB RF Attenuator
AM-FM DDS Signal Generator:
AM/FM DDS Signal Generator PCB [CSE211002]
ATMEGA644PA-AN programmed for the AM/FM DDS Signal Generator [CSE21100A.HEX]
0.96in yellow/cyan OLED with SSD1306 controller
Firmware for the AM/FM DDS Signal Generator [CSE21100A.HEX]
AM/FM DDS Signal Generator PCB pattern (PDF download) [CSE211002]
Front panel label and drilling diagram for the AM/FM DDS Signal Generator
Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.