Kits / Part Sets - Silicon Chip Shop

Our Shop will operate over the Christmas period with less frequent mailing. See news link on the front page for details.

Silicon Chip Shop - Kits / Part Sets (search for shop items within this category)

DCC Remote Controller kit

An almost-complete kit for the DCC Remote Controller project. It includes the PCB and all onboard components, including the RJ-45 socket option. All you need to add is the plastic case.

Photo shows the assembled kit. Check the link immediately below for a full list of included parts.

Cat No SC7552. Price: AUD $35.00 ¹

In stock:

yes (25 available). Estimated dispatch time: 1-3 days

Related to: Project: DCC Remote Controller (February 2026)

Other items relevant to this project:

DCC Remote Controller PCB [09111245] ($5.00)
DCC Remote Controller software [0911124C] (Free)
DCC Remote Controller PCB pattern (PDF download) [09111245] (Free)

Kit parts list

	6 × 4-pin 6.2×6.2mm tactile switch, reverse-mounting (Adafruit 5410)
	1 × 9mm 10kΩ linear single-gang potentiometer (18t spline shaft)
	1 × 0.91-inch white OLED with 4-pin I²C interface
	1 × DCC Remote Controller PCB [09111245]

Connectors

2 × RJ45 connector (Encitech 3253-0007-02)

Semiconductors

	1 × PIC16F18146-I/SO programmed for the DCC Remote Controller [0911124C.HEX]
	1 × bicolour reverse gullwing 3.2×2.8mm SMD LED (red/green)

SMD Capacitors

2 × 100nF 50V M3216/1206 X7R

SMD Resistors

	2 × 10kΩ ±1% M3216/1206 ¼W
	4 × 2.2kΩ ±1% M3216/1206 ¼W
	1 × 1kΩ ±1% M3216/1206 ¼W

Cable & Hardware

	1 × 10cm length of Tinned copper wire, 0.7-1.0mm diameter
	1 × Medium, white face knob

Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.