Short Form Kits / Part Sets - Silicon Chip Shop

SMD parts for the Mini 12V USB Regulator with Low-Battery Cut-out

All the SMD parts required to build the switchmode regulator board from the article, "USB Charger Regulator With Low-Battery Cut-Out".

Pack includes:

1 x RT8299A 3A step-down regulator IC (SOIC-8)
1 x MCP1703AT-5002 5V LDO regulator (SOT-23)
1 x MCP6541-E/SN micropower comparator IC (SOIC-8)
1 x ASPI-6045S-6R8M 6.8µH 3A (3.9A sat.) 6x6mm SMD inductor
1 x SK33A 3A Schottky diode (DO-214AC/SMA)
1 x SMAJ15A 15V transient voltage suppressor (DO-214AC/SMA)
1 x BZX84-B16 16V Zener diode (SOT-23)
2 x 22µF 16V X5R SMD capacitors (3216/1206)
2 x 10µF 25V X5R SMD capacitors (2012/0805)
2 x 1µF 50V X7R SMD capacitors (3216/1206)
2 x 100nF 50V X7R SMD capacitors (3216/1206)
1 x 100pF 50V C0G SMD capacitor (3216/1206)
1 x 10MΩ ±1% SMD resistor (3216/1206)
1 x 1.43MΩ ±1% SMD resistor (3216/1206)
1 x 1MΩ ±1% SMD resistor (3216/1206)
1 x 6.8kΩ ±1% SMD resistor (3216/1206)
2 x 1.3kΩ ±1% SMD resistor (3216/1206)
1 x 100Ω ±1% SMD resistor (3216/1206)

PCB is available separately. Note that the (through-hole) connectors are not included as which ones you need depends on the application.

Cat No SC3102. Price: AUD $15.00 ¹		Add to trolley
In stock: yes (7 available). Estimated dispatch time: up to 3 days
Related to: Project: USB Charger Regulator With Low-Battery Cut-Out (September 2015)
Other items relevant for this project: Mini 12V USB Power Supply with Low-Battery Cut-out PCB [18107151/18107152] ($2.50) Mini 12V USB Power Supply with Low-Battery Cut-out PCB pattern (PDF download) [18107152] ($3.00)

Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.

Silicon Chip Shop - Short Form Kits / Part Sets (search for shop items within this category)