Kits / Part Sets - Silicon Chip Shop

Silicon Chip Shop - Kits / Part Sets (search for shop items within this category)

SMD parts for the Mini 12V USB Regulator with Low-Battery Cut-out

All the SMD parts required to build the switchmode regulator board from the article, "USB Charger Regulator With Low-Battery Cut-Out".

See the parts list link below for details.

PCB is available separately. Note that the (through-hole) connectors are not included as which ones you need depends on the application.

Cat No SC3102. Price: AUD $20.00 ¹

In stock:

yes (8 available). Estimated dispatch time: 1-3 days

Other items relevant to this project:

Kit parts list

1 × 6.8µH 3.9Asat 3Amax 6×6mm inductor (ASPI-6045S-6R8M)

Semiconductors

	1 × MCP6541T-E/SN comparator IC (SOIC-8)
	1 × MCP1703AT-5002E/CB 5V 250mA LDO regulator (SOT-23)
	1 × RT8299AZSP buck regulator (SOP-8)
	1 × BZX84-B16 16V ±2% ¼W zener diode (SOT-23)
	1 × SK33A-TP or B340A 30V 3A schottky diode (DO-214AC)
	1 × SMAJ15A 15V 400W unidirectional TVS diode (DO-214AC)

SMD Capacitors

	2 × 22µF 16V M3216/1206 X5R
	2 × 10µF 25V M2012/0805 X5R 10%
	2 × 1µF 50V M3216/1206 X7R
	2 × 100nF 50V M3216/1206 X7R
	1 × 100pF 50V M3216/1206 C0G/NP0

SMD Resistors

	1 × 10MΩ ±1% M3216/1206 ¼W
	1 × 1.43MΩ ±1% M3216/1206 ¼W
	1 × 1MΩ ±1% M3216/1206 ¼W
	1 × 6.8kΩ ±1% M3216/1206 ¼W
	2 × 1.3kΩ ±1% M3216/1206 ¼W
	1 × 100Ω ±1% M3216/1206 ¼W

Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.