|
Blue 3mm LED with diffused lens
A high-brightness blue LED in a 3mm through-hole package with standard (~25mm) lead length and diffused lens. Quite good brightness at 3V and can be driven with just a few milliamps.
|
|
TLE2022CP op amp IC (DIP-8)
A TL2022CP op amp in 8-pin DIP, as used in the CLASSiC-D Class-D amplifier and Isolated High-voltage Probe.
|
|
Isolated High-Voltage Probe PCB [04108141]
PCB for the Isolating High Voltage Probe.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
70 x 122mm.
|
|
Isolated High-Voltage Probe PCB pattern (PDF download) [04108141]
PDF with the PCB design for the Isolating High Voltage Probe (double-sided).
Due to the number of vias and small clearances, this would be impractical to etch at home. It's offered mainly as a reference.
|
|
Isolated High-Voltage Probe panel artwork (PDF download)
PDF with the front panel artwork for the Isolating High Voltage Probe.
There are two versions in the file, to suit either 200:1 or 500:1 maximum division ratios.
|
|
Isolated High-Voltage Probe drilling guide diagram (PDF download)
PDF with the drilling guide for the Isolating High Voltage Probe.
|
|
Hard-to-get parts for the Isolated High-Voltage Probe
A set of parts for the Isolating High Voltage Probe project. Does not include the PCB. The remainder of the parts (standard resistors, capacitors, switches, etc) can be bought from the usual suppliers.
See the parts list link below for details on what is included.
|