This is the firmware for the RP2350B PicoMite Computer V2
as described in the October 2025 issue of Silicon Chip.

The firmware file to load is: Firmware\PicoMiteHDMIUSBV6.00.03.uf2
To load it you follow the usual process for a Raspberry Pi Pico
as described in the October 2025 article.

The file Firmware\PicoMiteV6.00.03.uf2 is provided for testing
in case you run into trouble but normally this will not be needed.

Two games (Blocks and PicoMan) are also provided in the Games folder.
These must be copied to the computer using XModem or transported
via an SD card (AUTOSAVE will not work).  The computer must be set
to a resolution of 640x480 pixels for the games to run.

