 |
Sound clips, 3D printing files and spreadsheet for the Styloclone
Four downloads for the Styloclone project, including three sample audio clips (MP3 format) plus a spreadsheet for calculating the resistor values (.ods LibreOffice Calc format, zipped).
|
 |
Firmware for JMP007 - Ultrasonic Garage Door Notifier
The firmware (Arduino sketch) for the Ultrasonic Garage Door Notifier (JMP007).
|
|
Firmware for JMP009 - Stroboscope
The firmware for the Stroboscope and Tachometer Mini Project (JMP009). It includes the Arduino sketch and TimerOne library.
|
|
Model Railway Tunnel Timer PCB Gerber files and firmware (ZIP download)
The Gerber (PCB) files and firmware (HEX file) for the Model Railway Tunnel Timer from Circuit Notebook, August 2024.
|
 |
Styloclone PCB, case version [23106241]
The Styloclone PCB. This is the version that fits in the instrument case.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
179 x 123mm.
|
 |
Styloclone PCB, benchtop version [23106242]
The Styloclone PCB. This is the version that sits on a benchtop on tapped spacer feet.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
207 x 124.5mm.
|
 |
Dual Mini LED Dice PCB, white, for TH LEDs [08103241]
The PCB for the Dual Mini LED Dice. This is the version that uses 3mm through-hole LEDs, with a white solder mask.
59.5 x 26mm
|
 |
Dual Mini LED Dice PCB, white, for SMD LEDs [08103242]
The PCB for the Dual Mini LED Dice. This is the version that uses SMD LEDs, with a white solder mask.
59.5 x 26mm
|
 |
Dual Mini LED Dice PCB, black, for TH LEDs [08103241]
The PCB for the Dual Mini LED Dice. This is the version that uses 3mm through-hole LEDs, with a black solder mask.
59.5 x 26mm
|
 |
Dual Mini LED Dice PCB, black, for SMD LEDs [08103242]
The PCB for the Dual Mini LED Dice. This is the version that uses SMD LEDs, with a black solder mask.
59.5 x 26mm
|
 |
180-230V DC Motor Speed Controller PCB [11104241]
The PCB for the 180-230V DC Motor Speed Controller.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
201 x 134mm.
|
 |
Styloclone PCB patterns (PDF download) [23106241-2]
PDFs with both versions of the Styloclone PCB. They are two-layer designs; each PDF has both layers of one version.
|
 |
Dual Mini LED Dice PCB patterns (PDF download) [08103241-2]
A PDF with both versions of the Mini LED Dice PCB. Both layers of each version are together in the same page of the PDF.
|
 |
180-230V DC Motor Speed Controller PCB pattern (PDF download) [11104241]
A PDF file with the PCB pattern for the HV DC Motor Speed Controller.
Both layers are in a single file.
|
 |
Styloclone panel cutting and 3D printing files
The panel cutting diagrams (which can be used as templates) and 3D printing files (.stl and .gcode formats) for the Styloclone project.
|
 |
Drilling diagrams for the Beer Can Filler project
A PDF with the drilling/construction diagrams for the Beer Can Filler.
It has two pages. The first has the construction details at 25% scale.
The second has the front-panel drilling diagram at actual size, so it can be printed and used as a template if desired.
|
 |
180-230V DC Motor Speed Controller lid panel artwork and drilling templates
This PDF has the panel artwork for the 180V DC Motor Speed Controller on the first page, plus the full-size drilling templates/diagrams on the second and third pages.
|
 |
Dual Mini LED Dice kit (TH LED version)
A complete kit to build the Dual Mini LED Dice with 3mm through-hole LEDs. All parts from the parts list are included (see the link immediately below for details).
The LEDs included are seven red and seven blue. A piece of heatshrink tubing is also in the kit. The only thing you need to add is a CR2032 coin cell.
Choose the PCB soldermask colour when ordering.
Note: the photo shows the assembled kit with a white solder mask PCB.
|
 |
Dual Mini LED Dice kit (SMD LED version)
A complete kit to build the Dual Mini LED Dice with M3216/SMA-size SMD LEDs. All parts from the parts list are included (see the link immediately below for details).
The LEDs included are seven red and seven blue. A piece of heatshrink tubing is also in the kit. The only thing you need to add is a CR2032 coin cell.
Choose the PCB soldermask colour when ordering.
Note: the photo shows the assembled kit with a black solder mask PCB.
|
