 |
PICAXE08M2 software source code for the Music Box/Doorbell
BASIC source code for the Circuit notebook entry "PICAXE-based music box or doorbell", April 2014.
|
 |
40V/5A Hybrid Switchmode/Linear Bench Supply PCB [18104141]
PCB for the 100W Hybrid Bench Supply.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
198 x 95mm.
|
 |
USB/RS-232C Serial Interface PCB [07103141]
PCB for the USB/RS232C Interface.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
76 x 46mm.
|
 |
Rubidium Frequency Standard Breakout Board PCB [04105141]
PCB for the Rubidium Time and Frequency Standard Breakout Board.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay (single-sided design).
We have also made provision for a rear-facing DC socket, so that the DC plug can pass through a hole drilled in the case.
102 x 38mm.
|
 |
40V/5A Hybrid Switchmode/Linear Bench Supply PCB pattern (PDF download) [18104141]
PDF with the PCB design for the Hybrid Linear/Switchmode 40V 5A Bench Supply (double-sided).
Both layers are in a single PDF. Note that due to the number and size of vias it would be very difficult to etch this board yourself.
|
 |
USB/RS-232C Serial Interface PCB pattern (PDF download) [07103141]
PDF with the PCB design for the USB/RS232C Interface (double-sided).
Both layers are in a single PDF.
|
 |
Rubidium Frequency Standard Breakout Board PCB pattern (PDF download) [04105141]
PDF with the PCB design for the Rubidium Time and Frequency Standard Breakout Board (single-sided).
|
 |
40V/5A Hybrid Switchmode/Linear Bench Supply panel artwork (PDF download)
Front and rear panel artwork for the Hybrid Switchmode/Linear Bench Supply.
|
 |
USB/RS-232C Serial Interface panel artwork (PDF download)
Lid panel artwork for the USB/RS232C Interface.
|
 |
SMD parts for the 40V/5A Hybrid Switchmode/Linear Bench Supply
All the SMD parts for the Hybrid Bench Supply plus a couple of extra parts.
See the parts list link below for details on what is included. We sell the PCB separately.
|