 |
Barking Dog Blaster Firmware and source code (HEX/ASM) [2510812B.HEX]
Zipped HEX file to program the PIC12F675 microcontroller for the Barking Dog Blaster project.
ASM source code also included.
Updated 01/04/2021 to fix a timing bug (the old version was coded 2510812A.HEX).
|
 |
ETD29 transformer components
A set of parts needed to build an ETD29-based transformer (excluding winding wire and insulation). The set contains:
- 1 x 13-pin former (B66359W1013T001)
- 2 x iron cores (B66358G0000X187)
- 2 x clips (B66359S2000X000)
This set is suitable for building a variety of projects - see below.
|
 |
Barking Dog Blaster PCB [25108121]
PCB for the Barking Dog Blaster.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
106 x 61mm.
|
 |
PIC12F675-I/P programmed for the Barking Dog Blaster [2510812A.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed for the Barking Dog Blaster project, from September 2012.
|
 |
Barking Dog Blaster PCB pattern (PDF download) [25108121]
PDF with the Barking Dog Blaster PCB design.
|
 |
Barking Dog Blaster panel artwork (PDF download)
PDF with the lid/panel designs for the Barking Dog Blaster project.
One file has the original panel for the small box, the second file also contains the larger panel which may be required if you're adding a remote control to it, as described in the October 2012 issue.
|