|
PIC16F88 firmware and source code for the Programmable Ignition System
Firmware (HEX file) and assembly language source code for the Programmable Ignition System.
|
|
Sample timing maps for the Programmable Ignition System
Two Excel spreadsheets showing sample timing (11x11 and 15x15) for the Programmable Ignition System. Each spreadsheet also shows a 3D graph of that same data.
|
|
Programmable Ignition System main PCB [05104071]
Main PCB for the Programmable Ignition System for Cars.
It's a single-sided design but is made as a double-sided board so that wire links do not need to be used.
Note: Trigger Module and Hand Controller PCBs are available separately.
102 x 81mm.
|
|
Programmable Ignition System Trigger Module PCB [05104072]
Trigger PCB for the Programmable Ignition System for Cars.
It's a single-sided design but is made as a double-sided board so that wire links do not need to be used.
Note: Main PCB and Hand Controller PCB are available separately.
39.5 x 39.5mm.
|
|
Programmable Ignition System Hand Controller PCB [05104073]
Hand Controller PCB for the Programmable Ignition System for Cars.
It's a single-sided design but is made as a double-sided board so that wire links do not need to be used.
Note: Main PCB and Trigger Module PCB are available separately.
115 x 65mm.
|
|
PIC16F88-E/P programmed for the Programmable Ignition System [ignprgm.hex]
PIC16F88-E/P 8-bit microcontroller programmed with the software for the Programmable Ignition System.
|
|
Programmable Ignition System PCB patterns (PDF download) [05104071/2/3]
PDF with the PCB designs for the Programmable Ignition System (single-sided).
There are three PCBs in this file - the main PCB (05104071), the ignition trigger module (05104072) and the hand controller (05104073).
|
|
Programmable Ignition System front panel artwork (PDF download)
PDF of the front panel artwork for the Programmable Ignition System for Cars.
|