 |
DCC Base Station software
The software package for the January 2026 DCC base station, including the Arduino sketch and .uf2 files, ready to load onto a Raspberry Pi Pico 2 module.
|
 |
3.5-inch TFT Touchscreen LCD module with SD card socket
A 3.5in 480x320 pixel colour touchscreen display module with an ILI9488-compatible controller, as used in the Micromite LCD BackPack V3 and described in the May 2019 issue.
Uses a 14-pin header for interfacing to the display and touch sensor, plus a 4 pin (unpopulated) header for the onboard SD card holder.
|
 |
DCC Base Station PCB [09111243]
The PCB for the DCC Base Station.
Double-sided PCB with plated through holes, green solder mask and white silkscreen overlay.
55 x 131mm.
|
 |
DCC Base Station PCB pattern (PDF download) [09111243]
A PDF with the PCB pattern for the DCC Base Station.
It's a double-sided design and both layers are in a single PDF.
|
 |
DCC Base Station front panel [09111244]
The front panel/lid for the DCC Base Station, made using a black PCB with white silkscreen printing. The holes are all pre-cut.
130 x 68mm.
|
 |
DCC Base Station short-form kit
This kit for the DCC Base Station includes the front panel, PCB and all of the non-optional parts that mount on it, including the 3.5-inch LCD touchscreen.
It includes an RJ-45 socket (CON6) but not CON4 or CON5, which may not be required, depending on how you intend to use it.
You just need to add the plastic case, a power supply and some glue.
|
