 |
SSB Shortwave Receiver firmware (CSE25020A)
The BASIC source code and compiled HEX file for the Arduino Nano controller in the SSB Shortwave Receiver (CSE25020A).
|
 |
SI5351A clock generator module
A clock generator module based on the SI5351A IC. Along with the assembled PCB, it comes with a header and three RF connectors that can be soldered to it.
|
 |
Micrometals Amidon T50-6 toroidal core
A powdered iron core suitable for the SSB Shortwave Receiver project (two are required for that project).
OD: 12.7mm
ID: 7.7mm
Width: 4.83mm
Ie: 3.19cm
Ae: 0.112cm²
V: 0.358cm³
|
 |
SMD transistor - BF998 12V 30mA dual-gate depletion-mode Mosfet (SOT-143)
A dual-gate Mosfet in an SOT-143 SMD package, as used in the SSB Shortwave Receiver. Three are required for that project.
|
 |
16x2 Alphanumeric module with blue backlight
A small two-line 16-column alphanumeric LCD with blue LED back-lighting. This is a very common type of LCD used in a wide range of designs.
|
 |
SSB Shortwave Receiver PCB set [CSE250202-3]
The two PCBs you need to build the SSB Shortwave Recevier: the control board (CSE250202, 150 × 79.5mm) and the RF board (CSE250203, 152 × 50mm).
Double-sided PCBs with plated through holes, green solder mask and silkscreen overlay.
|
 |
SSB Shortwave Receiver PCB patterns (PDF download) [CSE250202-3]
A PDF with the PCB patterns for the SSB Shortwave Receiver.
Both boards are double-sided and everything is in a single PDF.
|
 |
SSB Shortwave Receiver front panel [CSE250204]
The front panel for the SSB Shortwave Receiver, made using a black PCB with white silkscreen printing.
165.5 x 97mm.
|
