Silicon Chip Shop - All shop items     (search for shop items within this category)

	RGB LED 'Analog' Clock firmware The firmware (HEX & C code) files for the PIC16F18146 in the RGB LED Analog Clock. Cat No SC2138. Price: Free Files: RGB LED Clock (1910125A) software.zip (ZIP contains .hex file and MPLAB X project; 634.0KB) Related to: Project: RGB LED Analog Clock (May 2025 [print issue] [online issue]) View 5 other items relevant to the same project(s)
	BZ-121 miniature GNSS receiver A tiny (12x16mm) GPS/GLONASS/BDS/GALILEO receiver with a four-pin pluggable cable and the following specifications. Chip: u-blox M10050(Ten Generation Chip) GNSS systems supported: GPS, GLONASS, BDS, GALILEO, SBAS, QZSS (Default GPS+GLONASS+BDS joint positioning) Frequencies: GPS L1,GLONASS L1,BDS L1,GALILEO L1,SBAS L1,QZSS L1 Power supply: 5V DC Size: 12x16x4.5mm Interface: PCB pads or supplied 4-wire cable Weight: 2.2g Antenna: Ultrathin ceramic antenna (oil spraying process, prevent scratching and oxidation) Receiving channels: 72 Baud rate: 115,200 Output Protocol: NMEA or UBLOX (Dual protocol) Output Frequency: 1Hz-10Hz (default: 10Hz) Speed accuracy: 0.05m/s Horizontal Positioning Accuracy: 1.5m (open air) Receiving Sensitivity: Trace -162dBm / Capture -160dBm Wire colours: red=5V, white=RX, yellow=TX, black=GND Cat No SC7414. Price: AUD $30.00 1  Add to trolley In stock: yes (14 available). Estimated dispatch time: 1-3 days Related to: Project: RGB LED Analog Clock (May 2025 [print issue] [online issue]) View 5 other items relevant to the same project(s)
	RGB LED 'Analog' Clock PCB (19101251) The PCB for the RGB LED 'Analog' Clock. It's also available as part of our kit for this project Double-sided PCB with plated through holes, black solder mask and silkscreen overlay. 200 x 200mm. Cat No SC7415. Price: AUD $15.00 1  Add to trolley In stock: yes (18 available). Estimated dispatch time: 1-3 days Related to: Project: RGB LED Analog Clock (May 2025 [print issue] [online issue]) View 5 other items relevant to the same project(s)
	PIC16F18146-I/SO programmed for the RGB LED 'Analog' Clock [1910125A.HEX] A PIC16F18146-I/SO 8-bit wide SOIC microcontroller programmed with the firmware for the RGB LED 'Analog' Clock (1910125A.HEX). Cat No SC7417. Price: AUD $10.00 1  Add to trolley In stock: yes (2 available). Estimated dispatch time: 3-10 days Related to: Project: RGB LED Analog Clock (May 2025 [print issue] [online issue]) View 5 other items relevant to the same project(s)
	RGB LED 'Analog' Clock PCB pattern (PDF download) (19101251) A PDF with the PCB pattern for the RGB LED Analog Clock. It is a double-sided design and both sides are in a single PDF. Cat No SC1849. Price: Free Files: RGB LED Analog Clock PCB (19101251).pdf (112.6KB) Related to: Project: RGB LED Analog Clock (May 2025 [print issue] [online issue]) View 5 other items relevant to the same project(s)
	RGB LED 'Analog' Clock kit This kit includes the Clock PCB and all onboard components, including the programmed microcontroller, LEDs and either a BZ-121 miniature GPS module or a Raspberry Pi Pico W to get NTP time via WiFi. If you choose the Pico W option, you will need to load it with the firmware (available for download from the Software section of our website) to turn it into a time source. You may also want to order the USB Power Adaptor kit if you want to add a USB socket for powering the Clock. Otherwise, you can use the DC input header to connect a plugpack or similar power supply. Click the link immediately below for a list of all parts included in the kit. The photo shows the assembled kit. More kits are expected to be in stock by Monday 5/5/2025. Time source: BZ-121 GPS/GNSS modulePico W (NTP) Cat No SC7416. Price: AUD $65.00 1  Add to trolley In stock: no. Estimated dispatch time: approximately 1 week Related to: Project: RGB LED Analog Clock (May 2025 [print issue] [online issue]) View 5 other items relevant to the same project(s) Show kit parts list