 |
Pico 2 Audio Analyser firmware (0410723B)
The software for the Pico 2 Audio Analyser. It includes a .uf2 file that can be loaded directly into the Pico 2, plus the source code and libraries.
|
 |
1.3-inch blue OLED with 4-pin I²C interface
128x64 pixel, 3cm OLED display to suit the June 2019 GPS Speedo/Clock/Volume Control project.
|
 |
1.3-inch white OLED with 4-pin I²C interface
128x64 pixel, 3cm OLED display to suit the June 2019 GPS Speedo/Clock/Volume Control project.
|
 |
Pico (2) Audio Analyser PCB [04107231]
The PCB for the Pico Audio Analyser or Pico 2 Audio Analyser.
Double-sided PCB with plated through holes, black solder mask and silkscreen overlay.
83 x 50mm.
|
 |
Pico Audio Analyser PCB pattern (PDF download) [04107231]
A PDF with the PCB pattern for the Pico Audio Analyser.
It's a double-sided design and both layers are in a single PDF.
|
 |
Short-form kit for the Pico 2 Audio Analyser
A kit that includes most parts needed to build the Pico Audio Analyser. It has the PCB and all onboard parts - see the link immediately below for a full list.
It does not include the case, battery holder, battery, chassis connectors or wiring.
The Raspberry Pi Pico 2 is included but not programmed. You can easily program it yourself using a computer, the free software download from our website and a suitable USB cable.
Note: the photo shows the fully assembled device including the parts not included in the kit.
|
