 |
Pico Computer demonstration software
The demo software for the Pico Computer, including both source code and precompiled .uf2 files.
|
 |
ESP-PSRAM64 64Mb (8MB) PSRAM chip (SOIC-8)
An eight megabyte pseudo static RAM (PSRAM) chip in an 8-pin SOIC SMD package.
|
|
DS3231MZ real-time clock IC (SOIC-8)
An accurate timekeeping chip with precision internal MEMS oscillator in a standard 8-pin SOIC SMD package.
|
 |
DS3231 real-time clock IC (SOIC-16)
An accurate timekeeping chip with precision internal crystal in a wide SOIC-16 SMD package.
|
 |
Pico Computer PCB [07112234]
The main Pico Computer Board PCB.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
98 x 68mm.
|
 |
PWM Audio PCB [07112238]
The PWM Audio PCB described in the Digital Video BackPack article (07112238).
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
32 x 17mm.
|
 |
Pico Computer & PWM Audio Module PCB patterns (PDF download) [07112234, 07112238]
A PDF with both sides of the Pico Computer and PWM Audio Module PCB designs.
|
 |
Pico Computer panel cutting diagrams
This PDF has the front and rear panel cutting details for the Pico Computer.
Please check the article as some hole positions can vary depending on how you build it.
|
 |
Pico Computer front panel (07112235)
The front panel for the Pico Computer that suits the Altronics H0192 case.
99 x 37mm.
|
 |
Pico Computer kit
A kit to build the Pico Computer board. If building the full Pico Computer, you will also need the Digital Video Terminal kit. This kit includes the front panel for the Pico Computer.
No Raspberry Pi Pico is included with this kit, as the Digital Video Terminal kit comes with three.
If you're building this standalone and need the Pico, there's a separate kit (SC7378) that includes everything that's in this kit, plus a Pico.
See the link immediately below for a full list of parts in this kit. The photo shows the assembled Pico Computer Board that can plug into the Digital Video Terminal.
|
 |
PWM Audio Module kit
A small kit to build the optional PWM Audio module for the Pico Computer (it can be used in other applications too).
It includes the PCB and everything that mounts on it. Click the link immediately below for a full list of parts.
The photo shows the assembled module.
|
|
Pico Computer kit with Pico
The same kit as SC7374 but with a Raspberry Pi Pico included. That is useful if you will be building the SC7374 kit as a standalone PCB, rather than adding it to the Digital Video Terminal.
See the link immediately below for a full list of parts in this kit. The photo shows the assembled Pico Computer Board.
|
 |
Digital Video Terminal kit
A short-form kit that Includes everything needed to build the Pico Digital Video Terminal except the case (which is available from Altronics).
The Raspberry Pi Picos in the kit are not programmed. They can be programmed easily using a micro USB cable and a computer, as described in the article.
See the link immediately below for a full list of what's included in the kit.
There are two cases that can be used so make sure you select the correct front panel when you order the kit, so suit the case you'll be using.
Note: photo shows assembled kit.
|
