|
Firmware (ASM and HEX) files for the Mains Power-Up Sequencer
The HEX and ASM files for the 8-bit PIC16F1459 in the Mains Power-Up Sequencer proejct.
|
|
Mains Power-Up Sequencer PCB (10108231)
The PCB for the Mains Power-Up Sequencer project.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
203 x 134mm.
|
|
PIC16F1459-I/P programmed for the Mains Power-Up Sequencer (1010823A.HEX)
A PIC16F1459-I/P 8-bit DIP microcontroller programmed with the receiver firmware for the Mains Power-Up Sequencer (1010823A.HEX).
Note that this microcontroller is also available as part of the hard-to-get parts set for that project.
|
|
Mains Power-Up Sequencer PCB pattern (PDF download) [10108231]
A PDF file with the PCB pattern for the Mains Power-Up Sequencer.
It is a double-sided design and both layers are in a single file.
|
|
Panel labels and cutting diagrams for the Mains Power-Up Sequencer
This three-page PDF has both versions of the lid panel labels, plus the case drilling/cutting diagrams for the Mains Power-Up Sequencer.
|
|
Mains Power-Up Sequencer hard-to-get parts
This set of parts includes the critical components needed to build the Mains Power-Up Sequencer: the PCB, the programmed microcontroller, all other semiconductors and the insulating LED bezels.
There are quite a few other parts required, but they are all standard types that should be available from your usual electronics retailer.
Click the link immediately below for a full list of all parts included in this set.
Note: photo shows fully assembled PCB, including parts not included in this set.
|
|
Mains Power-Up Sequencer Current Detection add-on hard-to-get parts
This set includes a few extra parts needed to add the Current Detection feature to the Mains Power-Up Sequencer.
Click the link immediately below for a list of parts included in this set.
|