|
Firmware for the Wii Nunchuk RGB Light Driver
The firmware (HEX file and MPLAB X source code) for the Wii Nunchuck RGB LED Light Controller.
If programming the HEX file directly, rather than using the Arduino IDE, check the fuses.txt file as you may need to set the fuses too.
|
|
Nunchuck RGB LED Lights PCB (16103241)
The PCB for the Wii Nunchuk RGB Light Driver project.
Double-sided PCB with plated through holes, black solder mask and silkscreen overlay.
213 x 158mm.
|
|
ATmega32U4 programmed with the firmware for the Nunchuck RGB LED Driver [1610324A.HEX]
An ATmega32U4-AU 8-bit SMD microcontroller in a 44-pin TQFP package programmed with the firmware for the Wii Nunchuk RGB Light Driver (1610324A.HEX).
|
|
Nunchuck RGB LED Lights PCB pattern (16103241)
A PDF file with the PCB pattern for the Wii Nunchuk RGB Light Driver.
It is a double-sided design and both layers are in a single file.
The design would be impractical to etch yourself; this is provided mainly as a reference.
|