|
Firmware for the Pico Digital Video Terminal
There are two ZIP files for this project. The small one just contains the .uf2 file and is all you need if you just want to program the three Raspberry Pi Picos used in this project.
The second, much larger ZIP file includes all the source code in case you want to read or modify it.
|
|
Digital Video Terminal PCB (07112231)
The PCB for the Pico Digital Video Terminal project.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
98 x 68mm.
|
|
Digital Video Terminal PCB pattern (07112231)
A PDF file with the PCB pattern for the Pico Digital Video Terminal.
It is a double-sided design and both layers are in a single file.
|
|
Pico Digital Video Terminal panel cutting diagrams
This PDF has the front and rear panel cutting diagrams for the Digital Video Terminal project.
|
|
Digital Video Terminal front panel (07112232)
The front panel for the Pico Digital Video Terminal that suits the Altronics H0190 case.
99 x 22mm.
|
|
Digital Video Terminal front panel (07112233)
The front panel for the Pico Digital Video Terminal that suits the Altronics H0191 case.
99 x 27mm.
|
|
Digital Video Terminal kit
A short-form kit that Includes everything needed to build the Pico Digital Video Terminal except the case (which is available from Altronics).
The Raspberry Pi Picos in the kit are not programmed. They can be programmed easily using a micro USB cable and a computer, as described in the article.
See the link immediately below for a full list of what's included in the kit.
There are two cases that can be used so make sure you select the correct front panel when you order the kit, so suit the case you'll be using.
Note: photo shows assembled kit.
|