 |
Firmware (C and HEX) files for the Coin Cell Emulator [1810123A.HEX]
The firmware files for the PIC16F18146 chip in the Coin Cell Emulator project (1810123A.HEX).
|
 |
1.3-inch blue OLED with 4-pin I²C interface
128x64 pixel, 3cm OLED display to suit the June 2019 GPS Speedo/Clock/Volume Control project.
|
 |
1.3-inch white OLED with 4-pin I²C interface
128x64 pixel, 3cm OLED display to suit the June 2019 GPS Speedo/Clock/Volume Control project.
|
 |
Coin Cell Emulator PCB [18101231]
The PCB for the Coin Cell Emulator.
Double-sided PCB with plated through holes, black solder mask and silkscreen overlay.
78 x 44mm.
|
 |
PIC16F18146-I/SO programmed for the Coin Cell Emulator [1810123A.HEX]
An 8-bit PIC microcontroller in 20-pin wide SOIC package, programmed for the Coin Cell Emulator (1810123A.HEX).
Note that this microcontroller is also available as part of the kit for that project.
|
 |
Coin Cell Emulator PCB pattern (PDF download) [18101231]
A PDF with the six PCB patterns for the Coin Cell Emulator.
It's a double-sided design and both layers are in a single PDF file.
|
 |
Coin Cell Emulator kit
A kit that includes all the parts needed to build the Coin Cell Emulator. It has the PCB and all onboard parts - see the link immediately below for a full list.
Note: the photo shows the fully assembled kit.
|
