|
Firmware (ASM and HEX) files for the Secure Remote Switch
The firmware files for both the PIC16F1459 (receiver) and PIC16LF15323 (transmitter) chips in the Secure Remote Switch design.
|
|
Secure Remote Switch receiver PCB (10109231)
The receiver PCB for the Secure Remote Switch.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
70 x 96.5mm.
|
|
Secure Remote Switch transmitter PCB (10109232)
The module-based transmitter PCB for the Secure Remote Switch.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
30 x 39.5mm.
|
|
Secure Remote Switch transmitter PCB (10109233)
The discrete-component-based transmitter PCB for the Secure Remote Switch.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
30 x 39.5mm.
|
|
PIC16F1459-I/P programmed for the Secure Remote Switch receiver (1010923R.HEX)
A PIC16F1459-I/P 8-bit DIP microcontroller programmed with the receiver firmware for the Secure Remote Switch (1010923R.HEX).
Note that this microcontroller is also available as part of the receiver short-form kit for that project.
|
|
PIC16LF15323-I/SL programmed for the Secure Remote Switch transmitter (1010923A.HEX)
A PIC16LF15323-I/SL 8-bit SOIC microcontroller programmed with the transmitter firmware for the Secure Remote Switch (1010923A.HEX).
Note that this microcontroller is also available as part of one of the transmitter kits for that project.
|
|
Secure Remote Switch PCB patterns (PDF download) [10109231-3]
Two PDF files with the PCB patterns for the Secure Remote Switch.
All three designs are double-sided. The first PDF has both layers for the receiver, while the second PDF has both layers for both transmitter designs.
|
|
Panel labels for the Secure Remote Switch
A PDF with the front & rear panel labels for the Secure Remote Switch receiver, along with two versions of the transmitter keyfob label and the universal transmitter sticker artwork.
|
|
Secure Remote Switch receiver short-form kit
A kit that includes most of the parts needed to build the Secure Remote Switch receiver, including the PCB and most onboard parts. You just need to add the case, 433.9MHz receiver module RX1 and switches S1 & S5.
All the parts needed to run off 12V or 24V DC are included but please make sure to choose the correct relay voltage from the options below when ordering.
See the link below for details on everything included in this kit.
Note: the photo shows the assembled board, ready to install in its case.
|
|
Secure Remote Switch transmitter short-form kit (module version)
A kit that includes most of the parts to build the Secure Remote Switch transmitter, including the PCB, components, case and label (sticker). You just need to add the 433.9MHz transmitter module and battery.
See the link below for details on everything included in this kit.
Note: the photo shows the assembled board in the case with the lid removed. Battery not included.
|
|
Secure Remote Switch transmitter complete kit (discrete version)
A kit that includes virtually all the parts to build the Secure Remote Switch transmitter, including the PCB, components, case and label (sticker). You just need to add the battery.
See the link below for details on everything included in this kit.
Note: the photo shows the assembled board in the case with the lid removed. Battery not included.
|