|
K-Type Thermocouple Thermometer/Thermostat firmware (0410823A.HEX)
The software for the new Thermometer/Thermostat.
|
|
MCP1700 3.3V LDO (TO-92)
A 3.3V low-dropout regulator in TO-92 package (MCP1700-3302E/TO).
|
|
Thermocouple Thermometer/Thermostat main PCB (04108231)
The main PCB for the Thermometer/Thermostat.
Double-sided PCB with plated through holes, red solder mask and silkscreen overlay.
98 x 70mm.
|
|
Thermocouple Thermometer/Thermostat front panel PCB (04108232)
The front panel/switch PCB for the Thermometer/Thermostat.
Double-sided PCB with plated through holes, red solder mask and silkscreen overlay.
19 x 22mm.
|
|
PIC16F1459-I/P programmed for the Thermocouple Thermometer/Thermostat (0410823A.HEX)
A PIC16F1459-I/P 8-bit DIP microcontroller programmed with the receiver firmware for the Thermocouple/Thermostat (0410823A.HEX).
Note that this microcontroller is also available as part of the short-form kit for that project.
|
|
K-Type Thermocouple Thermometer/Thermostat PCB pattern (PDF download) [04108231]
A PDF with the PCB pattern for the K-Type Thermometer/Thermostat.
There are two double-sided PCB patterns with the top and bottom layers of both in a single PDF.
|
|
K-Type Thermostat panel artwork (PDF download)
The front and rear panel artwork for the K-Type Thermocouple Thermostat. This download also includes the panel cutting diagram.
|
|
K-Type Thermocouple Thermometer/Thermostat short-form kit
A kit that includes most of the parts you need to build the Thermometer/Thermostat. Click the link immediately below to see a list of everything that's included in the kit.
What isn't included: the case, LCD screen, thermocouple probe or cable gland. Pretty much everything else is included.
Note: the photo shows the assembled kit, including some parts that must be purchased separately.
|