|
Pico Audio Analyser firmware (0410723A)
The software for the Pico Audio Analyser. It includes a .uf2 file that can be loaded directly into the Pico plus the source code and libraries.
|
|
1.3-inch blue OLED with 4-pin I²C interface
128x64 pixel, 3cm OLED display to suit the June 2019 GPS Speedo/Clock/Volume Control project.
|
|
1.3-inch white OLED with 4-pin I²C interface
128x64 pixel, 3cm OLED display to suit the June 2019 GPS Speedo/Clock/Volume Control project.
|
|
Pico Audio Analyser PCB (04107231)
The PCB for the Pico Audio Analyser.
Double-sided PCB with plated through holes, black solder mask and silkscreen overlay.
83 x 50mm.
|
|
Pico Audio Analyser PCB pattern (PDF download) [04107231]
A PDF with the PCB pattern for the Pico Audio Analyser.
It's a double-sided design and both layers are in a single PDF.
|
|
Pico Audio Analyser box cutting details
A PDF with the box drilling and cutting details for the Raspberry Pi Pico-based Audio Analyser.
|
|
Short-form kit for the Pico Audio Analyser
A kit that includes most parts needed to build the Pico Audio Analyser. It has the PCB and all onboard parts - see the link immediately below for a full list.
It does not include the case, battery holder, battery, chassis connectors or wiring.
The Raspberry Pi Pico is included but not programmed. You can easily program it yourself using a computer, the free software download from our website and a suitable USB cable.
Note: the photo shows the fully assembled device including the parts not included in the kit.
|