|
Dynamic NFC/RFID Tag programming software
The Arduino library, .ino sketch file and .uf2 firmware file used to program Dynamic NFC/RFID Tags with a Raspberry Pi Pico.
|
|
Large Dynamic RFID Tag PCB (06101232)
The larger (credit card sized) PCB for the Dynamic NFC/RFID Tag.
Double-sided PCB with plated through holes, black solder mask and silkscreen overlay.
86 x 54mm.
|
|
Small Dynamic RFID tag PCB (06101231)
The smaller PCB for the Dynamic NFC/RFID Tag.
Double-sided PCB with plated through holes, purple solder mask and silkscreen overlay.
22 x 31mm.
|
|
Dynamic NFC/RFID Tag PCB patterns [06101231/2]
A PDF with the PCB patterns for both Dynamic RFID Tag designs.
They are double-sided designs; both layers of each are side-by-side on the same page of the PDF.
|
|
Small Dynamic RFID Tag kit
A small kit that includes the small purple Tag PCB, the RFID chip and the three extra passive components.
Note: photo shows assembled tag.
|
|
Credit card size Dynamic RFID Tag kit
A small kit that includes the larger black Tag PCB, the RFID chip and the three extra passive components.
Note: photo shows assembled tag.
|