|
Firmware and laser cutting files for the Automated Test Bench Swiss Army Knife
This download package includes one zip file with the Arduino sketches (including compiled .bin file) and TestController plug-in for the Testbench Swiss Army Knife. The other zip file has the laser cutting details for the enclosure lid in DXF format.
Update 10/05/2023: the software has been revised to v1.1 as the original version swapped the control signals to RLY1 & RLY2.
|
|
5V to ±15V boost module
A small module that converts +5V to +15V and -15V, as used in the Automated Test Bench Swiss Army Knife project.
|
|
ESP32 DevKitC microcontroller module with WiFi and Bluetooth
A DevKitC style ESP32 board, as used in the WiFi Bench Supply.
|
|
Automated Test Bench Swiss Army Knife PCB [04110221]
The TestBench Swiss Army Knife circuit board.
Double-sided PCB with plated through holes, blue solder mask and silkscreen overlay.
142 x 83.5mm
|
|
Automated Test Bench Swiss Army Knife PCB pattern (PDF download) [04110221]
A PDF with the PCB pattern for the TestBench Swiss Army Knife. Both layers are in a single PDF.
|
|
Laser-cut UB1 Jiffy box lid for the Test Bench Swiss Army Knife
A matte black laser-cut acrylic lid to replace the UB1 Jiffy Box lid for the Automated Test Bench project. This is also included in the kit we sell for that project.
|
|
Testbench Swiss Army Knife short form kit
A kit for the Automated Test Bench that includes the PCB, all SMDs, the boost module, the SIP reed relay and the laser-cut lid. Click the link immediately below for a full list of all parts.
Note: photo shows assembled prototype PCB.
|