|
Firmware for the Active Mains Soft Starter [1011022A]
The PIC12F617-I/P microcontroller firmware (HEX files) plus assembly language source code for the Active Soft Starter.
|
|
Active Mains Soft Starter PCB (10110221)
The PCB for the Active Soft Starter (RevC).
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
159.5 x 109mm
|
|
PIC12F617-I/P programmed for the Active Mains Soft Starter [1011022A.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the firmware for the Active Soft Starter (1011022A.HEX).
|
|
Active Mains Soft Starter PCB pattern (PDF download) [10110221]
A PDF with the PCB pattern for the Active Soft Starter (10110221).
Both layers are in a single PDF.
|
|
Active Mains Soft Starter lid panel artwork (PDF download)
The lid panel label artwork for the Active Soft Starter (as a PDF). Also included is a PDF showing the locations of the required cut-outs in the case.
|
|
Hard-to-get parts for the Active Mains Soft Starter
A set of parts for the Active Mains Soft Starter. It is not a complete set but once you have these parts, you should be able to get the rest from Jaycar and/or Altronics.
See the link immediately below for a list of all the parts included. All semiconductors are in the set, including the programmed microcontroller, plus the relay, transformer and NTC thermistor.
Note: the photo shows the fully assembled PCB, including parts not in this set.
|