|
Raspberry Pi Pico W BackPack software
A collection of sample software for the Pico W BackPack, as mentioned in the article.
|
|
3.5-inch TFT Touchscreen LCD module with SD card socket
A 3.5in 480x320 pixel colour touchscreen display module with an ILI9488-compatible controller, as used in the Micromite LCD BackPack V3 and described in the May 2019 issue.
Uses a 14-pin header for interfacing to the display and touch sensor, plus a 4 pin (unpopulated) header for the onboard SD card holder.
|
|
DS3231MZ real-time clock IC (SOIC-8)
An accurate timekeeping chip with precision internal MEMS oscillator in a standard 8-pin SOIC SMD package.
|
|
DS3231 real-time clock IC (SOIC-16)
An accurate timekeeping chip with precision internal crystal in a wide SOIC-16 SMD package.
|
|
Raspberry Pi Pico BackPack PCB [07101221]
The PCB for the Pico BackPack or Pico W BackPack. This is also available as part of a complete kit for those projects.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
99 x 55mm
|
|
Raspberry Pi Pico BackPack PCB pattern (PDF download) [07101221]
A PDF with the PCB design for the Pico BackPack or Pico W BackPack (double-sided).
Both layers are in a single PDF.
|
|
Matte/Gloss Black UB3 Lid for Advanced GPS Computer (BackPack V3) or Pico BackPack
A lid laser cut from 3mm black acrylic which replaces the lid supplied with a UB3 "Jiffy" box. Attaches with the supplied screws. One side is gloss black, the other side is matte black. You can fit it either way around.
Unlike the standard Micromite LCD BackPack V3 lid, this one sits on top of the box rather than being recessed inside, which is necessary to fit all the parts used in that project.
This is also suitable for use with the Pico BackPack with 3.5in touchscreen.
|
|
Matte/Gloss Black UB3 Lid for Micromite LCD BackPack V3 or Pico BackPack using 3.5in screen
A lid laser cut from 3mm black acrylic which replaces the lid supplied with a UB3 "Jiffy" box. Attaches with the supplied screws. One side is gloss black, the other side is matte black. You can fit it either way around.
Unlike the lids designed for the 2.8in screens, this one recesses within the Jiffy box, giving a slightly more compact result.
|
|
Raspberry Pi Pico W BackPack kit
A kit of all the parts needed to build the Raspberry Pi Pico W BackPack module, including the PCB and all the optional components except for the DS3231 real-time clock IC (available separately). See the link below for a full list of parts included in the kit.
This kit also includes four 1mm-thick Nylon washers, and four of the eight M3 screws are 8mm long, so you can either build it as a standalone module or mount it to a panel. That includes mounting it in a UB3 Jiffy box using our laser-cut acrylic lid (also sold separately, see below).
Note: photo shows the assembled Pico W BackPack module with the optional RTCC IC fitted.
|