 |
Small 2A boost step-up regulator module (MT3608)
A 36x17mm module which uses the MT3608 boost regulator IC. Input is 2-24V, output is 5-28V at up to 2A continuous.
Efficiency up to 93%, switching frequency 1.2MHz. Output voltage is adjusted using a multi-turn trimpot. The input and output DC connections are made via pads in the corner of the PCB.
|
 |
Breadboard PSU main PCB [04112221]
The PCB for the regulator section of the Breadboard Power Supply.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
99 x 54mm.
|
 |
Breadboard PSU PCB patterns (PDF download) [04112221/2]
One PDF with the PCB patterns for the Breadboard PSU (code 04112221) and Display Adaptor (code 04112222).
Both sides of both designs are in a single PDF.
|
 |
Complete kit for the Breadboard PSU
A set of all the parts needed to build the Breadboard PSU. This does not include the display portion; that is available as a separate kit.
Click the link below to see a list of all the parts included. Note: the photo shows the kit after assembly.
|
 |
Complete kit for the Breadboard PSU Display
A set of all the parts needed to build the Breadboard PSU panel meter that shows the voltages, currents etc. You will also need the base Breadboard PSU that is available as a separate kit.
Click the link below to see a list of all the parts included. Note: the photo shows both kits assembled together.
|
