|
Firmware for the Improved SMD Test Tweezers [0410621B.HEX]
The C code (MPLAB X project) and hex file for the PIC16F15214 in the Updated SMD Test Tweezers project.
|
|
64x32 white OLED screen (0.49-inch, 1.25cm diagonal)
A small 64x32 white OLED screen, as used in the Pocket Audio Oscillator and SMD Test Tweezer projects.
|
|
SMD Test Tweezers PCB set [04106211+04106212]
A set of PCBs to build the SMD Test Tweezers. Includes the main board (04106211) plus two of the Tweezer arms (04106212).
Double-sided PCBs with plated through holes, green solder mask and silkscreen overlay.
One of 28 x 26mm and two of 100 x 8mm.
|
|
PIC16F15214-I/SN programmed for the Improved SMD Test Tweezers [0410621B.HEX]
An 8-bit PIC microcontroller in 8-pin SOIC (SMD) programmed for the Updated SMD Test Tweezers (0410621B.HEX).
|
|
SMD Test Tweezers PCB patterns (PDF download) [04106211/2]
A PDF with the PCB designs for the SMD Test Tweezers (double-sided).
Both layers of both boards are in a single PDF. Two copies of the tweezer arms are included.
|
|
Improved SMD Test Tweezers kit
A kit of parts to build the SMD Test Tweezers. The updated version from the April 2022 issue replaces the pre-existing kit as it does everything the earlier one did and more.
It includes the PCB, programmed microcontroller, other onboard parts, heatshrink tubing and gold-plated header pins for the tips.
This kit does not include the lithium button cell. The photo shows what it looks like after assembly.
If you would prefer the pre-made tweezer 'hands' as pictured on page 69 of the original (October 2021) article, these can be purchased from Altronics, part #: P0417.
|