|
Software for the Remote Control Range Extender
The firmware for the 2021 Remote Control Range Extender - two HEX files plus the ASM source code.
The files named 1510219A are for the PIC12F617 in the larger UHF receiver/IR transmitter unit, while the files starting with 1510219M are for the PIC10LF322 in the tiny UHF transmitter.
|
|
Remote Control Range Extender IR-to-UHF PCB [15109212]
The UHF transmitter PCB for the Remote Control Range Extender.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
15 x 12mm.
|
|
Remote Control Range Extender UHF-to-IR PCB [15109211]
The UHF receiver/IR transmitter PCB for the Remote Control Range Extender.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
78.5 x 47mm.
|
|
PIC12F617-I/P programmed for the Remote Control Range Extender (UHF to IR part) [1510921A.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the UHF-to-IR firmware for the Remote Control Range Extender (1510921A.HEX).
|
|
PIC10LF322-I/OT programmed for the Remote Control Range Extender (UHF transmitter part) [1510921M.HEX]
A PIC10LF322-I/OT 8-bit SMD microcontroller (SOT-23-6) programmed with the UHF transmitter firmware for the Remote Control Range Extender (1510921M.HEX).
|
|
Remote Control Range Extender PCB patterns (PDF download) [15109211-2]
A PDF with both PCB designs for the Remote Control Range Extender (both double-sided).
Both layers of both boards are in a single PDF.
|
|
Lid panel label artwork and box drilling diagrams for the Remote Control Range Extender
The lid panel artwork PDF download, plus the drilling and cutting diagrams for the 2021 Remote Control Range Extender.
|
|
Kit for the Remote Control Range Extender IR-to-UHF adaptor
A kit of all the parts needed to build the mini PCB module for the Remote Control Range Extender UHF transmitter.
The kit includes the PCB, programmed microcontroller and all other onboard components including the optional pull-up resistor. It does not include any wiring.
Keep in mind that this kit includes parts as small as 0.6 x 0.3mm so it requires advance soldering skills and/or tools.
Note: the photo shows the fully assembled module.
|