|
Firmware for the Advanced GPS Computer [0510221A.HEX]
The firmware package for the Advanced GPS Computer.
This includes the MMBasic source code, HEX file to program the chip, the CFUNCTIONs and some of the programs that were used to generate the graphics etc.
|
|
DS3231 real-time clock IC (SOIC-16)
An accurate timekeeping chip with precision internal crystal in a wide SOIC-16 SMD package.
|
|
VK2828U7G5LF TTL GPS/GLONASS/GALILEO module with antenna and cable
A VK2828U7G5LF GPS module from GMOUSE. Data sheet is available at https://github.com/CainZ/V.KEL-GPS/blob/master/VK2828U7G5LF%20Data%20Sheet%2020150902.pdf
Features onboard ceramic patch antenna. Basic specifications are:
- 28 x 28 x 8.6mm
- 3.3-5V supply at 25-35mA
- TTL signalling, default 9600 baud
- Enable input, 1PPS output plus serial TX & RX with NMEA 0183
- Tracking sensitivity -162dBm, capture sensitivity -160dBm
- Cold start 26 seconds, hot start one second
- 1-10Hz updates
A short 6-way cable with plug is supplied. If you order this, you may receive a VK2828U8G5LF which is an updated version of the module with slightly better specifications but provides the same functions.
Cat No SC3362. Price: AUD $25.00 1 |
|
Add to trolley |
In stock: yes (9 available). Estimated dispatch time: 1-3 days | Related to:
- Project: A GPS-Synchronised Clock (March 2009 [print issue] [online issue])
- Project: A GPS-Synchronised Clock (March 2009 [print issue] [online issue])
- Project: Dead-Accurate 6-Digit GPS-Locked Clock, Pt.1 (May 2009 [print issue] [online issue])
- Project: GPS Driver Module For The 6-Digit Clock, Pt.2 (June 2009 [print issue] [online issue])
- Project: GPS Synchronisation For Clocks With Sweep Hands (November 2009 [print issue] [online issue])
- Project: GPS Synchronisation For Clocks With Sweep Hands (November 2009 [print issue] [online issue])
- Project: A Multi-Function GPS Car Computer, Pt.1 (January 2010 [print issue] [online issue])
- Project: A Multi-Function GPS Car Computer, Pt.2 (February 2010 [print issue] [online issue])
- Project: Build A GPS Boat Computer (October 2010 [print issue] [online issue])
- Project: A 2.5GHz 12-digit Frequency Counter, Pt.1 (December 2012 [online issue])
- Project: A 2.5GHz 12-Digit Frequency Counter, Pt.2 (January 2013 [print issue] [online issue])
- Project: Accurate GPS 1pps Timebase For Frequency Counters (February 2013 [online issue])
- Project: Deluxe GPS 1pps Timebase For Frequency Counters (April 2013 [print issue] [online issue])
- Project: Build A GPS Tracker & Record Your Journeys (November 2013 [print issue] [online issue])
- Project: L-o-o-o-n-g Gating Times For The 12-Digit Counter (July 2014 [print issue] [online issue])
- Project: 6-Digit Retro Nixie Clock Mk.2, Pt.1 (February 2015 [print issue] [online issue])
- Project: 6-Digit Retro Nixie Clock Mk.2, Pt.2 (March 2015 [print issue] [online issue])
- Project: High Visibility 6-Digit LED GPS Clock (December 2015 [print issue] [online issue])
- Project: High Visibility 6-Digit LED GPS Clock, Pt.2 (January 2016 [print issue] [online issue])
- Project: Touch-Screen Boat Computer With GPS (April 2016 [print issue] [online issue])
- Project: Touchscreen Super Clock (July 2016 [print issue] [online issue])
- Project: GPS-synchronised Analog Clock Driver (February 2017 [print issue] [online issue])
- Circuit Notebook: Remote water level monitoring using LoRa and Arduino (July 2017 [print issue] [online issue])
- Project: An Arduino Data Logger with GPS (August 2017 [print issue] [online issue])
- Project: Arduino Data Logger Part 2 (September 2017 [print issue] [online issue])
- Feature: El Cheapo Modules Part 10: GPS receivers (October 2017 [print issue] [online issue])
- Project: Super Clock now shows your electricity tariff (July 2018 [print issue] [online issue])
- Project: GPS-synched Frequency Reference Pt.1 (October 2018 [print issue] [online issue])
- Project: GPS-synched, lab-quality frequency reference (Part 2) (November 2018 [print issue] [online issue])
- Project: Very accurate speedo, car clock & auto volume change (June 2019 [print issue] [online issue])
- Project: Advanced GPS Computer - Part 1 (June 2021 [print issue] [online issue])
- Project: Advanced GPS Computer – Part 2 (July 2021 [print issue] [online issue])
- Project: New GPS-Synchronised Analog Clock (September 2022 [print issue] [online issue])
|
View 119 other items relevant to the same project(s) |
|
|
MCP4251-502E/P dual 5kΩ digital potentiometer
An MCP4251-502E/P chip in a 14-pin DIL package, as used in the June 2019 GPS "Finesaver Plus" Speedo/Clock/Volume Control project.
|
|
Advanced GPS Computer PCB [05102211]
The Advanced GPS Computer PCB.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
123 x 58mm.
|
|
PIC32MX170F256B-50I/SP programmed for the Advanced GPS Computer [0510221A.hex]
A 32-bit PIC microcontroller in 28-pin DIP package programmed for the Advanced GPS Computer.
This includes MMBasic, which is pre-loaded onto the chip.
|
|
Advanced GPS Computer PCB pattern (PDF download) [05102211]
A PDF with the PCB design of the Advanced GPS Computer (double-sided).
This board attaches to the Micromite LCD BackPack V3. Both layers are in a single PDF.
|
|
Advanced GPS Computer box cutting diagram and lid dimensions
A PDF containing the box drilling and cutting diagrams for the Advanced GPS Computer, plus a template for the laser-cut replacement lid.
|
|
Matte/Gloss Black UB3 Lid for Advanced GPS Computer (BackPack V3) or Pico BackPack
A lid laser cut from 3mm black acrylic which replaces the lid supplied with a UB3 "Jiffy" box. Attaches with the supplied screws. One side is gloss black, the other side is matte black. You can fit it either way around.
Unlike the standard Micromite LCD BackPack V3 lid, this one sits on top of the box rather than being recessed inside, which is necessary to fit all the parts used in that project.
This is also suitable for use with the Pico BackPack with 3.5in touchscreen.
|
|
Micromite LCD BackPack V3 complete kit
A kit of all the non-optional parts required to build the Micromite LCD BackPack V3. See the parts list link below for details on what is included.
The PCBs, programmed microcontrollers and regulator are also available separately.
For assembly, set-up and operating instructions, see the article in the August 2019 issue.
Please note: software options which do not support the 3.5-inch touchscreen have been removed from the programming list as this was causing confusion.
|