|
Firmware and source code for the SiLabe FM-AM-SW Digital Radio [CSE210301.HEX]
The ATmega328 microcontroller firmware (HEX file) plus BASIC source code for the Single-Chip Silicon Labs FM/AM/SW Digital Radio Receiver.
If programming the chip with the HEX file yourself, make sure you read the README.TXT file and follow the instructions regarding 'fuse' bits programming.
|
|
Pulse-type rotary encoder with pushbutton and 18t spline shaft
A five-pin rotary encoder with two mounting tabs that has been confirmed as the pulse type. Suitable for use in several projects published in the magazine (see below).
|
|
Si4732-A10 AM/FM/SW/LW/RDS Radio Receiver IC
The Si4732 radio receiver IC in a SOIC-16 package, as used in the 'Single-Chip Silicon Labs FM/AM/SW Digital Radio Receiver' from the July 2021 issue.
This receiver IC integrates the complete broadcast tuner and receiver function from antenna input to digital audio output.
|
|
SiLabs FM/AM/SW Digital Radio PCB [CSE210301C]
The PCB for the Silicon Labs-based FM/AM/SW Digital Radio.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
123 x 49.5mm.
|
|
ATmega328P programmed with the firmware for the SiLabs FM/AM/SW Digital Radio [CSE210301.HEX]
A ATmega328 8-bit microcontroller programmed with the firmware for the Single-Chip Silicon Labs FM/AM/SW Digital Radio Receiver (CSE210301.HEX).
|
|
SiLabs FM/AM/SW Digital Radio PCB pattern (PDF download) [CSE210301C]
A PDF with the PCB design of the Silicon Labs-based FM/AM/SW Digital Radio (double-sided).
Both layers are in a single PDF.
|
|
Drilling/cutting diagrams and front panel artwork for the SiLabs-based FM-AM-SW Digital Radio
The panel artwork and drilling/cutting diagrams for the Silicon Labs-based FM/AM/SW Digital Radio.
|