|
Firmware for the Digital FX Unit [0110221A.HEX]
The firmware package for the Digital FX Pedal (0110221A.HEX).
This includes the HEX file to program the EEPROM and the PIC12F1571 firmware for the version that uses a potentiometer to select effects.
|
|
Spin FV-1 digital effects IC (SOIC-28)
One Spin SPN1001-FV1 IC, as used in our Digital FX Unit in the April 2021 issue.
|
|
Digital FX Unit PCB (potentiometer-based version) [01102211]
PCB for the potentiometer-based version of the Digital FX Pedal. This PCB also requires the PIC12F1571 for potentiometer operation.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
86 x 112mm.
|
|
Digital FX Unit PCB (switch-based version) [01102212]
PCB for the switch-based version of the Digital FX Pedal. This PCB does NOT require the PIC12F1571 for switch operation.
The 16-position rotary switch (a Lorlin BCK1001) is available from both element14 (Order Code: 2797230) and RS Components (Stock No.: 655-3162).
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
86 x 112mm.
|
|
24LC32A-I/SN EEPROM programmed for the Digital FX Unit [0110221A.HEX]
An 8-pin 24LC32A-I/SN EEPROM programmed with the effects data for the Digital FX Pedal (0110221A.HEX).
|
|
PIC12F1571-I/SN programmed for the Digital FX Unit with potentiometer [0110221B.HEX]
A PIC12F1571-I/SN 8-bit SMD microcontroller programmed with the firmware for the Digital FX Pedal (0110221B.HEX).
You only need this chip if you are building the version of the Digital FX Pedal that uses a potentiometer to select between the effects.
Note: you might receive a programmed PIC12F1572-I/SN depending on what we have in stock. It will function identically.
|
|
Digital FX Unit PCB patterns (PDF download) [01102211-2]
A PDF with both PCB designs for the Digital FX Pedal (double-sided).
Both layers of both versions of the board (01102211 [pot-based] & 01102212 [switch-based]) are in a single PDF.
|