|
Arduino-based Adjustable Power Supply Software
The Arduino sketch (.ino file) and Processing software to run on the computer for the Arduino Power Supply.
|
|
SMD resistor - 15mΩ ±1% M6332/2512 3W (CRA2512-FZ-R015ELF or similar)
One SMD shunt resistor rated at 15mΩ ±1% 3W. As used in the Induction Motor Speed Controller, Arduino-based Adjustable Power Supply and Battery Multi Logger/Manager (up to three required for the latter).
|
|
MCP4251-502E/P dual 5kΩ digital potentiometer
An MCP4251-502E/P chip in a 14-pin DIL package, as used in the June 2019 GPS "Finesaver Plus" Speedo/Clock/Volume Control project.
|
|
Arduino-based Adjustable Power Supply PCB [18106201]
The PCB for the Arduino-based Power Supply shield.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
68.5 x 53.5mm.
|
|
Arduino-based Adjustable Power Supply PCB pattern (PDF download) [18106201]
A PDF with the PCB design of the Arduino Adjustalbe Power Supply shield (double-sided).
Both layers are in a single PDF.
|