 |
Firmware for the AM/FM/SW Single-Chip Digital Radio
The BASCOM source code and firmware HEX file for the Arduino Nano board in the single-chip AM/FM/SW radio.
|
 |
Pulse-type rotary encoder with pushbutton and 18t spline shaft
A five-pin rotary encoder with two mounting tabs that has been confirmed as the pulse type. Suitable for use in several projects published in the magazine (see below).
|
 |
PCB-mount right-angle SMA socket
A PCB-mounting SMA socket with a shaft around 13-14mm long, suitable for the VHF input of the DAB+/FM/AM radio.
|
 |
16x2 Alphanumeric serial (I²C) LCD module with blue backlight
A 16x2 alphanumeric LCD module with blue backlight, supplied with an I²C driver module. Solder the module to the display and you can update the characters on the display over an I²C bus.
For more details, see the El Cheapo Asian Electronic Modules article in the March 2017 issue.
|
 |
AM/FM/SW Single-Chip Digital Radio PCB [CSE200902A]
The PCB for the single-chip AM/FM/SW radio.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
128.5 x 89mm.
|
 |
AM/FM/SW Single-Chip Digital Radio PCB pattern (PDF download) [CSE200902A]
A PDF with the PCB design of the single-chip AM/FM/SW radio (double-sided).
Both layers are in a single PDF.
|
 |
Cutting diagrams and front panel artwork for the AM/FM/SW Single-Chip Digital Radio (PDF download)
The panel artwork and box cutting diagram for the single-chip AM/FM/SW radio.
|
