 |
Parts source grid for the USB SuperCodec
A spreadsheet file (in both .ods and .xls formats) which contains the parts list for the USB SuperCodec, along with catalog codes for the six major parts suppliers: Altronics, Jaycar, Digi-Key, Mouser, element14 and RS.
Note that we have not purchased all these parts. We have tried to choose parts which are compatible with the specifications, based on information on the vendors' websites, but you should check them to make sure they are suitable and match our specifications in the published parts list.
Also note that the parts selected were in stock and actively being made at the time this list was prepared, however, you may find that some of them are out of stock or unavailable. In most cases, alternative parts with similar specifications will be available from the same supplier.
Updated 13/08/2020 to fix an error and because one item is no longer available from Digi-key.
Updated 10/11/2020 to specify smaller inductors in some cases, because they were a bit too big to fit in the available space.
|
 |
USB SuperCodec PCB [01106201]
The main PCB for the USB Super Codec.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
99.5 x 213mm.
|
 |
USB SuperCodec Balanced Input Attenuator add-on PCB [01106202]
Double-sided PCB for the USB Super Codec Balanced Input Attenuator add-on, with plated through holes, solder mask and silkscreen overlay.
99.5 x 141.5mm.
|
 |
USB SuperCodec PCB pattern (PDF download) [01106201]
A PDF with the PCB design for the USB SuperCodec (double-sided).
This would be difficult to etch yourself, due to the number and location of vias, so it's provided mainly as a reference.
Both layers are in a single PDF.
|
 |
USB SuperCodec Balanced Input Attenuator add-on PCB pattern (PDF download) [01106202]
A PDF with the PCB design for theUSB SuperCodec Balanced Input Attenuator add-on (double-sided).
Both layers of the board are in a single PDF.
|
 |
USB SuperCodec front panel artwork (PDF download)
A PDF of the front panel artwork for the SuperCodec USB Sound Card.
The second file (ZIP) is a set of Adobe Illustrator and EPS files for custom-made SuperCodec panels created by Olivier Aubertin (see Mailbag, March 2021, page 8).
|
 |
Drilling and cutting diagrams for the USB SuperCodec Balanced Input Attenuator (PDF download)
Case cutting diagrams for the Balanced Input Attenuator for the USB SuperCodec.
|
