|
Arduino sketch for the Mini WiFi LCD BackPack
The Arduino sketch and required libraries (zipped) for the D1 Mini module used in the D1 Mini LCD BackPack with WiFi.
|
|
3.5-inch TFT Touchscreen LCD module with SD card socket
A 3.5in 480x320 pixel colour touchscreen display module with an ILI9488-compatible controller, as used in the Micromite LCD BackPack V3 and described in the May 2019 issue.
Uses a 14-pin header for interfacing to the display and touch sensor, plus a 4 pin (unpopulated) header for the onboard SD card holder.
|
|
Mini WiFi LCD BackPack PCB [24106201]
The PCB for the D1 Mini LCD BackPack with WiFi.
Double-sided PCB with plated through holes, green solder mask and silkscreen overlay.
99 x 54.5mm.
This PCB is also available as part of a complete kit.
|
|
Mini WiFi LCD BackPack PCB pattern (PDF download) [24106201]
A PDF with the PCB design for the D1 Mini LCD BackPack with WiFi (double-sided).
Both layers of both boards are in a single PDF.
Note (02/10/2020): the pattern has been revised since it was an incorrect version.
|
|
Matte/Gloss Black UB3 Lid for Micromite LCD BackPack V3 or Pico BackPack using 3.5in screen
A lid laser cut from 3mm black acrylic which replaces the lid supplied with a UB3 "Jiffy" box. Attaches with the supplied screws. One side is gloss black, the other side is matte black. You can fit it either way around.
Unlike the lids designed for the 2.8in screens, this one recesses within the Jiffy box, giving a slightly more compact result.
|
|
Mini WiFi LCD BackPack kit
A kit of parts for the D1 Mini LCD BackPack with WiFi. See the parts list link below for details on what is included.
The PCBs is also available separately. Note: photo shows assembled module without touchscreen.
For assembly, set-up and operating instructions, see the article in October 2020 issue.
|