|
Firmware (HEX) files and BASIC source code for the Touchscreen RCL Box [RCLBox.hex]
Firmware (with pre-loaded BASIC code) and BASIC source code for the Touchscreen RCL Box.
The .HEX file includes MMBasic and the 3.5in touchscreen configuration data as well as the pre-loaded BASIC source code.
|
|
Touchscreen RCL Box resistor PCB [04104201]
The resistor section for the RCL Box.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
114 x 57mm, 0.6mm thick.
|
|
Touchscreen RCL Box capacitor/inductor PCB [04104202]
The capacitor/inductor section for the RCL Box.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
114 x 57mm, 0.6mm thick.
|
|
PIC32MX170F256B-50I/SP programmed for the Touchscreen RCL Box
A 32-bit PIC microcontroller in 28-pin DIP package programmed for the Touchscreen RCL Box. This includes the Micromite software as well as the 3.5in TFT LCD configuration, with the RCL Box BASIC program pre-loaded.
|
|
Touchscreen RCL Box PCB patterns (PDF download) [04104201-2]
A PDF file containing the PCB patterns for both boards in the RCL Box, coded 04104201 and 04104202.
Both layers of both boards are in a single PDF.
|
|
Micromite LCD BackPack V3 complete kit
A kit of all the non-optional parts required to build the Micromite LCD BackPack V3. See the parts list link below for details on what is included.
The PCBs, programmed microcontrollers and regulator are also available separately.
For assembly, set-up and operating instructions, see the article in the August 2019 issue.
Please note: software options which do not support the 3.5-inch touchscreen have been removed from the programming list as this was causing confusion.
|