|
Firmware (HEX) file and BASIC source code for the Car Altimeter
Firmware (with pre-loaded BASIC code) and BASIC source for the Touchscreen Vehicle Altimeter.
The download includes the HEX file with everything included plus the separate BASIC source code.
|
|
GY-68 Barometric Pressure/Altitude/Temperature I²C Sensor breakout board
A tiny breakout board with a BMP180 barometric pressure/altitude/temperature sensor plus a regulator and level shifter. Connects easily to an Arduino, Micromite, etc using the I²C bus via a standard 4-pin header. For more information, see the GY-68 and BMP180 data sheets.
|
|
DHT22/AM2302 Compatible Temperature and Humidity sensor module
A DHT22/AM2302 or equivalent digital temperature and humidity sensor module, as described in the February 2017 "El Cheapo Electronic Modules" article.
If you're using this to build the Altimeter/Weather Station from December 2017, you will need a 1k resistor wired between pins 1 and 2 and a 100nF capacitor wired in series with pin 4; see errata.
|
|
Touchscreen Car Altimeter PCB [05105201]
The PCB for the Touchscreen Car Altimeter.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
86.5 x 49.5mm.
|
|
PIC32MX170F256B-50I/SP programmed for the Car Altimeter
A 32-bit PIC microcontroller in 28-pin DIP package programmed for the Touchscreen Vehicle Altimeter. This includes the Micromite software as well as the TFT LCD configuration, with the Altimeter BASIC program pre-loaded.
|
|
Touchscreen Car Altimeter PCB pattern (PDF download) [05105201]
A PDF file containing the PCB pattern for the Touchscreen Car Altimeter.
Both layers are in a single PDF.
|
|
Touchscreen Car Altimeter fan drilling template (PDF download)
A PDF file with the fan drilling details for the Vehicle Altimeter.
|
|
Micromite LCD BackPack V2 complete kit
A kit of all the parts required to build the revised version of the Micromite LCD BackPack. See the parts list link below for details on what is included.
PLEASE NOTE: the 10µF capacitors supplied are either non-polarised SMD or through-hole ceramic types. They have no markings and can be installed either way around.
The PCBs, programmed microcontrollers and regulator are also available separately. For assembly instructions, see the article in the May 2017 issue.
Programmed with: Lid colour: |
Cat No SC4237. Price: AUD $70.00 1 |
|
Add to trolley |
In stock: yes (24 available). Estimated dispatch time: 1-3 days | Related to:
|
View 49 other items relevant to the same project(s) |
Show kit parts list |
|