 |
Champion/Pre-champion PCB [01109121/01109122]
PCB for the Champion and Pre-champion low power audio amplifier.
Boards come joined; they can be built as a single unit or cut apart with a hacksaw.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay [single-sided design].
100 x 41mm.
|
 |
Champion/Pre-champion PCB pattern (PDF download) [01109121/01109122]
PDF with the PCB design for the Champion amplifier and Pre-champion pre-amplifier side-by-side (single-sided).
|
 |
Complete kit for the Champion+Pre-champion
A kit that includes all the parts needed to build the Champion and Pre-Champion, as described in the January 2013 issue. Click the link immediately below to see everything that's included in the kit.
The only parts you might need to add are some extra terminal blocks, screws, spacers etc if you decide to cut the board in half and use it as two separate boards.
Note: photo shows assembled kit. Some components may vary in appearance.
|
