 |
Firmware and source code for the Universal Battery Charge Controller [1410719A.HEX]
PIC16F88-I/P microcontroller firmware (HEX file) plus ASM source code for the Universal Battery Charge Controller.
The same software can be used for the revised version published in June 2022.
|
 |
Modified source code for the Universal Battery Charge Controller [1410719A.ASM]
Modified ASM source code for the Universal Battery Charge Controller, for a much faster switch-off delay when input power is lost.
See Ask Silicon Chip, May 2020, pages 106-107.
|
 |
Si8751AB 2.5kV isolated Mosfet driver with integral power supply
A single Si8751AB Mosfet driver IC in an 8-pin SOIC package, as used in the Digital Lighting Controller and original Universal 12/24V Battery Charge Controller.
|
 |
Universal Battery Charge Controller PCB [14107191]
Double-sided PCB for the Universal Battery Charge Controller, with plated through holes, solder mask and silkscreen overlay.
110 x 81mm.
|
 |
PIC16F88-I/P programmed for the Universal Battery Charge Controller [1410719A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Universal Battery Charge Controller (1410719A.HEX).
The same PIC is used in the revised version published in June 2022.
|
 |
Universal Battery Charge Controller PCB pattern (PDF download) [14107191]
A PDF with the PCB design for the Universal Battery Charge Controller (double-sided).
Both layers are in a single PDF.
|
 |
Universal Battery Charge Controller front panel artwork (PDF download)
A PDF of the front panel artwork for the Universal Battery Charge Controller.
|
 |
12/24V Battery Charge Controller front panel artwork and drilling template (PDF download)
A PDF of the panel artwork for the Universal Battery Charge Controller, which can also be used as a drilling template.
|