 |
Firmware and source code for the Low-Noise Stereo Preamplifier [0111111B.HEX] (previously 0111111A.HEX)
PIC16 microcontroller firmware (HEX file) plus ASM source code for the Low-Noise Stereo Preamplifier project.
This updated B version of the firmware solves the problem that the remote control section won't work without the input selector board plugged in.
|
 |
Low-Noise Stereo Preamplifier PCB [01111119]
PCB for the Low-Noise Stereo Preamplifier with Tone Controls.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
216 x 66mm.
|
 |
Input Switching Module PCB for the Low Noise Preamplifier [01111112]
PCB for the Preamplifier/Amplifier Input Switching Module.
PCB with plated through holes, solder mask and silkscreen overlay.
109.5 x 84.5mm.
|
 |
Input Selection Pushbutton PCB for the Low Noise Preamplifier [01111113]
PCB for the Preamplifier/Amplifier Input Selection Pushbuttons.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
66 x 24.5mm.
|
 |
Ultra-LD Mk3/Mk4 Amplifier Power Supply PCB [01109111]
PCB for the Ultra-LD Mk3 Amplifier Power Supply. Also suits the Ultra-LD Mk4.
PCB with plated through holes, solder mask and silkscreen overlay.
141 x 80mm.
|
 |
Universal Voltage Regulator PCB [18103111]
PCB for the Universal Voltage Regulator.
PCB with plated through holes, solder mask and silkscreen overlay.
71 x 35.5mm.
|
 |
PIC16F88-I/P programmed for the Low-Noise Stereo Preamp with Six Input Selector [0111111M.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Low-Noise Stereo Preamplifier (March-April 2019), when combined with the Six Input Audio Switcher project from the Six-way Stereo Audio Input Selector (September 2019) (0111111M.HEX).
|
 |
PIC16F88-I/P programmed for the Low-Noise Stereo Preamp [0111111B.HEX] (previously 0111111A.HEX)
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Low-Noise Stereo Preamplifier (0111111B.HEX).
This updated B version of the firmware solves the problem that the remote control section won't work without the input selector board plugged in.
|
 |
Low-Noise Stereo Preamplifier PCB pattern (PDF download) [01111119]
PDF with the PCB design for the Low-Noise Stereo Preamplifier with Tone Controls (double-sided).
This is the main board, which is double-sided. PCB patterns of the other optional boards are available separately for download.
Both layers are in a single PDF.
|
 |
Low-Noise Stereo Preamplifier Input Switcher PCB pattern (PDF download) [01111112]
PDF with the PCB design for the Low-Noise Stereo Preamplifier Input Switcher, including the version used in the Ultra-LD Mk.3 complete power amplifier (single-sided).
|
 |
Low-Noise Stereo Preamplifier Input Selector Pushbutton PCB pattern (PDF download) [01111113]
PDF with the PCB design for the Low-Noise Stereo Preamplifier Input Selector, including the version used in the Ultra-LD Mk.3 complete power amplifier (double-sided).
|
 |
Ultra-LD Mk.3 Power Supply PCB pattern (PDF download) [01109111]
PDF with the PCB design for the Ultra-LD Mk.3 amplifier power supply (single-sided).
|
 |
Universal Voltage Regulator PCB pattern (PDF download) [18103111]
PDF with the PCB design for the Universal Voltage Regulator (single-sided).
|