 |
Arduino Sketch (.ino) file for the Clayton's GPS Time Signal Generator
A ZIP package which includes the Arduino Sketch for the GPS Time Source project.
Updated November 2021. There are now two sketch files:
V11 should be used with ESP8266 Boards Manager Profile version 2.7.4 and earlier.
V12 should be used with ESP8266 Boards Manager Profile version 3.0.0 and later (tested with V3.0.2).
The 2022 update is the same code as the November 2021 update. The zip just includes the compiled version (.bin file) and a flashing tool executable for loading it into the module directly.
|
 |
ESP-01 WiFi module (with ESP8266 IC)
A small WiFi module with an ESP8266 IC and onboard antenna. Communication is via an 8-pin (4x2) header. See the article "A WiFi Server for $5" in the December 2014 issue.
Please note: if you order this item, you may receive an upgraded ESP-01S which has more flash (1MB vs 512KB).
|
 |
CP2102-based USB/TTL serial converter with 5-pin header and 30cm jumper cable
A small USB/serial converter module which plugs straight into a USB port and provides a standard 5-pin header interface with 5V, 3.3V, GND and TTL (3.3V) serial TX/RX pins. Suitable for direct connection to any of the Maximite or Micromite projects.
Modern operating systems like Windows 10 should not require any drivers to use this device - plug it in and it should be recognised and ready to use straight away.
The 5-way cable supplied has female "Dupont" headers on both ends, which plug into standard pin headers. It can be used to connect the adaptor to a Micromite LCD BackPack.
We have only tested this adaptor in Windows; it should work with Linux and Mac OSX.
|
